Determination of kinetic constants for the design of biological treatment dairy effluent in batchsystem



Document title: Determination of kinetic constants for the design of biological treatment dairy effluent in batchsystem
Journal: Revista técnica de la Facultad de Ingeniería. Universidad del Zulia
Database: PERIÓDICA
System number: 000446671
ISSN: 0254-0770
Authors: 1
1
1
1
1
1
1
Institutions: 1Universidad del Zulia, Facultad de Ingeniería, Maracaibo, Zulia. Venezuela
Year:
Volumen: 37
Number: 1
Pages: 11-19
Country: Venezuela
Language: Español
Document type: Artículo
Approach: Experimental, aplicado
Spanish abstract Se analizó el comportamiento de un reactor discontinuo secuencial (RBS) a escala de laboratorio durante el tratamiento de aguas residuales provenientes de una industria láctea. Se determinaron las constantes cinéticas que gobiernan el proceso de degradación y crecimiento biológico, tales como: tasa máxima de utilización de sustrato (k), constante de velocidad media (KS), coeficiente de producción de lodos (Y) y coeficiente de desaparición de los microorganismos (kd), utilizando para ello dos modelos cinéticos: Orozco y Michaelis-Menten. Para la puesta en marcha del reactor se estableció un tiempo de retención hidráulica (HRT) de 24 horas y una edad del lodo (qc) de 20 días. De acuerdo a los parámetros cinéticos estimados la ejecución del sistema de tratamiento puede ser descrita por el modelo de Orozco, por medio del cual se obtuvieron los siguientes coeficientes cinéticos para las etapas anaerobia, aerobia 1 y aerobia 2 respectiva-mente: 8,130; 1,350 y 0,765 d–1 para “k”, 0,167; 0,449 y 0,767 mg SSV/mg DQO para “Y” y 0,0114; 0,0017 y 0,0023 d–1 para “kd”.Palabras clave: sistema RBS, efluente lácteo, parámetros cinéticos
English abstract The behavior of a sequential batch reactor (SBR) at laboratory scale for treating wastewater from a dairy. Kinetic constants were determined which govern the process of degradation and biological growth, such as: maximum rate of substrate utilization (k), half rate constant (KS), sludge yield coefficient (Y) and coefficient of extinction of microorganisms (kd) using two kinetic models: Orozco and Michaelis-Menten. For the reactor operation was set hydraulic retention time (HRT) of 24 hours and a sludge age (qc) of 20 days. According to the kinetic parameters estimated performance of the treatment system can be described by the model of Orozco, by which we obtain the following kinetic coefficients for the anaerobic stage, aerobic 1 and 2 respectively: 8,130; 1,350 and 0,765 d–1 for “k”, 0,167; 0,449 and 0,767 mg VSS/mg COD for “Y” and 0,0114; 0,0017 and 0,0023 d–1 for “kd”
Disciplines: Química
Keyword: Aguas residuales,
Cinética anaeróbica,
Efluentes industriales,
Parámetros cinéticos,
Tratamiento biológico
Keyword: Anaerobic kinetics,
Biological treatment,
Industrial effluents,
Kinetics,
Waste water
Full text: https://produccioncientificaluz.org/index.php/tecnica/article/view/6940/6929