Drying soybean seed using air ambient temperature at low relative humidity



Document title: Drying soybean seed using air ambient temperature at low relative humidity
Journal: Revista brasileira de sementes
Database: PERIÓDICA
System number: 000281018
ISSN: 0101-3122
Authors: 1

2
Institutions: 1Empresa Brasileira de Pesquisa Agropecuaria, Centro Nacional de Pesquisa de Soja, Londrina, Parana. Brasil
2University of Florida, Department of Agronomy, Gainesville, Florida. Estados Unidos de América
Year:
Volumen: 28
Number: 2
Pages: 77-83
Country: Brasil
Language: Inglés
Document type: Nota breve o noticia
Approach: Experimental
English abstract Under subtropical and tropical environments soybean seed (Glycine max (L.) Merrill) are harvested early to avoid deterioration from weathering. Careful after-harvest drying is required and is an important step in maintaining the physiological quality of the seed. Soybean seed should be harvested when the moisture content is in a range of 16-20%. Traditional drying utilizes a high temperature air stream passed through the seed mass without dehumidification. The drying time is long because the system is inefficient and the high temperature increases the risk of thermal damage to the seed. New technology identified as heat pipe technology (HPT) is available and has the unique feature of removing the moisture from the air stream before it is passed through the seed mass at the same environmental temperature. Two studies were conducted to evaluate the performance of HPT for dry soybean seed. In the first study the seeds were dried from 17.5 to 11.1% in 2 hours and 29 minutes and in the second sudy the seeds were dried from 22.6 to 11.9% in 16 hours and 32 minutes. This drying process caused no reduction in seed quality as measured by the standard germination, tetrazolium-viability, accelerated aging and seedling vigor classification tests. The only parameter that indicated a slight seed quality reduction was tetrazolium vigor in the second study. It was concluded that the HPT system is a promising technology for drying soybean seed when efficiency and maintenance of physiological quality are desired
Portuguese abstract Em condições tropicais e subtropicais, a semente de soja [Glycine max (L.) Merrill] é colhida antecipadamente para reduzir os efeitos da deterioração por umidade em nível de campo. Nessa situação, a semente de soja deve ser colhida quando o seu grau de umidade está na faixa de 16 a 20%. A secagem cuidadosa da semente após a colheita antecipada é requerida e é uma etapa importante da manutenção da sua qualidade fisiológica. Secadores tradicionais utilizam fluxo de ar ambiente aquecido através da massa de sementes sem desumidificação. O período de secagem é longo porque o sistema tradicional de secagem é ineficiente e a alta temperatura aumenta o risco de dano térmico à semente. Nova tecnologia, identificada como "heat pipe technology" (HPT), está disponível e tem a característica única de remover a umidade do ar antes dele ser passado através da massa de sementes na mesma temperatura ambiente. Dois estudos foram conduzidos para avaliar o desempenho do sistema "HPT" para secar a semente de soja. No primeiro, as sementes foram secadas de 17,5% para 11,1% em duas horas e vinte e nove minutos e, no segundo, as sementes foram secadas de 22,6% para 11,9% em 16 horas e 32 minutos. O processo de secagem "HPT" não causou redução na qualidade fisiológica da semente, avaliada pelos testes de germinação, de tetrazólio-viabilidade, de envelhecimento acelerado e de classificação do vigor da plântula. O único parâmetro que indicou pequena redução na qualidade da semente foi o tetrazólio vigor, no segundo estudo. Concluiu-se que o sistema "HPT" é uma tecnologia promissora para a secagem da semente de soja, principalmente quando eficiência e manutenção da qualidade fisiológica são requeridas
Disciplines: Agrociencias,
Biología
Keyword: Leguminosas,
Fisiología vegetal,
Soya,
Glycine max,
Semillas,
Secado,
Temperatura,
Humedad,
Calidad,
Germinación
Keyword: Agricultural sciences,
Biology,
Legumes,
Plant physiology,
Soybean,
Glycine max,
Seeds,
Drying,
Temperature,
Humidity,
Quality,
Germination
Full text: Texto completo (Ver HTML)