| Revista: | Brazilian journal of chemical engineering |
| Base de datos: | PERIÓDICA |
| Número de sistema: | 000308972 |
| ISSN: | 0104-6632 |
| Autores: | Knesebeck, A1 Guardani, R2 |
| Instituciones: | 1Universidade Federal do Parana, Departamento de Engenharia Quimica, Curitiba, Parana. Brasil 2Universidade de Sao Paulo, Departamento de Engenharia Quimica, Sao Paulo. Brasil |
| Año: | 2004 |
| Periodo: | Ene |
| Volumen: | 21 |
| Número: | 1 |
| Paginación: | 47-57 |
| País: | Brasil |
| Idioma: | Inglés |
| Tipo de documento: | Artículo |
| Enfoque: | Experimental, aplicado |
| Resumen en inglés | Particles with a size distribution in the range of 34 to 468 µm were fluidized in a three-phase bed using low liquid and gas velocities. Particle size distribution and pressure profile measurements were carried out at different locations in the bed in order to study the influence of fluid velocities on segregation and dispersion of particles in different size classes. The influence of gas velocity on particle mixing was analyzed in terms of internal solid fluxes, calculated by means of the wake model. Based on the experimental results, different particle distribution patterns were identified. Although no significant tendencies were observed for radial profiles, particles of different sizes have significantly different axial profiles, which are mainly affected by the velocity of the liquid phase. Thus, depending on the liquid velocity, smaller particles reach a maximum concentration at different bed heights |
| Disciplinas: | Química |
| Palabras clave: | Ingeniería química, Fluidización trifásica, Segregación de partículas, Modelo de Wake |
| Keyword: | Chemistry, Chemical engineering, Three-phase fluidization, Particle segregation, Wake model |
| Texto completo: | Texto completo (Ver HTML) |
