| Revue: | Revista mexicana de física |
| Base de datos: | PERIÓDICA |
| Número de sistema: | 000397534 |
| ISSN: | 0035-001X |
| Autores: | Caballero Gómez, J1 Caicedo, J.C2 Aperador, W1 |
| Instituciones: | 1Universidad Militar Nueva Granada, Grupo de Investigación Volta, Bogotá. Colombia 2Universidad del Valle, Grupo de Investigación de Metalurgia de Polvo y Procesamiento de Reciclado Sólido, Cali, Valle del Cauca. Colombia |
| Año: | 2016 |
| Periodo: | Mar-Abr |
| Volumen: | 62 |
| Número: | 2 |
| Paginación: | 113-123 |
| País: | México |
| Idioma: | Inglés |
| Tipo de documento: | Artículo |
| Enfoque: | Analítico, teórico |
| Resumen en inglés | With the aim of generating solutions against the deterioration of the joint prostheses, it was studied the tribo-corrosive behavior of titanium niobium carbonitride (TiNbCN) deposited on stainless steel AISI 316 LVM using the technique of magnetron sputtering physical vapor deposition. The tests were performed in a balanced saline solution (Ringer's solution) which represents the characteristics of the body fluids, using an equipment where the micro-abrasive wear is generated by the contact of micro particles in the system; the micro-abrasion-corrosion mechanism is described by means of the incorporation of an electrochemical cell consisting of three electrodes. Both the substrate and the coating, were subjected to micro-abrasive wear simultaneously with the electrochemical tests of Tafel polarization curves and electrochemical impedance spectroscopy (EIS); subsequently of the tests, the specimens were analyzed by optical microscopy and scanning electron microscopy characterizing the surface morphology. It was observed that the coating presents an increase in its corrosion and wear resistance with the presence of a simulated biological fluid |
| Disciplinas: | Física y astronomía, Ingeniería |
| Palabras clave: | Física, Ingeniería de materiales, Microabrasión, Recubrimiento, Desgaste, Corrosión |
| Keyword: | Physics and astronomy, Engineering, Physics, Materials engineering, Microabrasion, Coating, Wear, Corrosion |
| Texte intégral: | Texto completo (Ver PDF) |
