Contenido de humedad y sustancias inorgánicas en subproductos maderables de pino para su uso en pélets y briquetas



Título del documento: Contenido de humedad y sustancias inorgánicas en subproductos maderables de pino para su uso en pélets y briquetas
Revue: Revista Chapingo. Serie ciencias forestales y del ambiente
Base de datos: PERIÓDICA
Número de sistema: 000374413
ISSN: 2007-3828
Autores: 1
2
3
4
2
2
2
Instituciones: 1Universidad Intercultural Indígena de Michoacán, Pátzcuaro, Michoacán. México
2Universidad Autónoma de Nuevo León, Facultad de Ciencias Forestales, Linares, Nuevo León. México
3Universidad Michoacana de San Nicolás de Hidalgo, Facultad de Ingeniería en Tecnología de la Madera, Morelia, Michoacán. México
4Universidad de Pinar del Río, Centro de Estudios de Energía y Tecnologías Sostenibles, Pinar del Río. Cuba
Año:
Periodo: Ene-Abr
Volumen: 20
Número: 1
Paginación: 77-88
País: México
Idioma: Español, inglés
Tipo de documento: Artículo
Enfoque: Experimental, aplicado
Resumen en español La industria forestal de la cabecera municipal Nuevo San Juan Parangaricutiro y de la Comunidad Indígena de Nuevo San Juan Parangaricutiro, Michoacán, México, generan 1,232 m3·año-1 de aserrín y viruta de pino que son subutilizados. El aserrín y la viruta de Pinus leiophylla Sch. Et Cham., P montezumae Lamb. y P. pseudostrobus Lindl se analizaron fisicoquímicamente para determinar si reunían los requisitos para la elaboración de pélets y briquetas. El contenido de humedad, ceniza y elementos inorgánicos de los subproductos se determinaron según estándares internacionales. El contenido de humedad en aserrín fue 51.5 ± 1.9 % y 53.7 ± 0.1 % en viruta; estos valores superaron el máximo permisible. El contenido de cenizas en el aserrín y en la viruta fue 0.26 ± 0.03 % y 0.34 ± 0.03 %, respectivamente. En las tres especies evaluadas, el porcentaje medio de Ca, K, Mg, P, S, Si, Fe, Al y Na en el aserrín fue 47.1 ± 2.8, 26.0 ± 2.5, 13.5 ± 0.4, 5.0 ± 0.4, 3.2 ± 0.4, 2.3 ± 0.8, 1.0 ± 0.1, 1.3 ± 0.4 y 1.4 ± 0.3, respectivamente, mientras que el porcentaje medio de Ca, K, Mg, P, S, Si, Fe, Al y Na en la viruta fue 43.2 ± 7.0, 16.5 ± 3.0, 10.1 ± 4.8, 4.0 ± 0.6, 1.8 ± 0.2, 3.6 ± 0.3, 1.0 ± 0.6, 1.1 ± 0.1, y 1.0 ± 0.6, respectivamente. El arsénico sólo se encontró en la viruta (17.1 ± 17.1 %). De acuerdo con los resultados, el aserrín es el subproducto más adecuado para la producción de pélets y briquetas
Resumen en inglés The forest industry in the municipal seat of Nuevo San Juan Parangaricutiro and the Indigenous Community of Nuevo San Juan Parangaricutiro, located in Michoacan state, Mexico, generates 1,232 m3-year-1 of underutilized pine sawdust and shavings. The sawdust and shavings of Pinus leiophylla Sch. Et Cham., P. montezumae Lamb. and P. pseudostrobus Lindl were subjected to physicochemical analyzes to determine if they meet the requirements for pellet and briquette production. The moisture, ash, and inorganic element contents in the byproducts were determined using international standards. Moisture content in ash was 51.5 ± 1.9 %, and 53.7 ± 0.1 % in shavings; these values exceeded the maximum allowable. Ash content in sawdust and shavings was 0.26 ± 0.03 % and 0.34 ± 0.03 %, respectively. For the three species evaluated, the average percentage of calcium, potassium, magnesium, phosphorus, sulfur, silicon, iron, aluminum and sodium in sawdust was 47.1 ± 2.8, 26.0 ± 2.5, 13.5 ± 0.4, 5.0 ± 0.4, 3.2 ± 0.4, 2.3 ± 0.8, 1.0 ± 0.1, 1.3 ± 0.4 and 1.4 ± 0.3, respectively, while the average percentage was 43.2 ± 7.0, 16.5 ± 3.0, 10.1 ± 4.8, 4.0 ± 0.6, 1.8 ± 0.2, 3.6 ± 0.3, 1.0 ± 0.6, 1.1 ± 0.1 and 1.0 ± 0.6 in shavings, respectively. Arsenic was only found in the shavings (17.1 ± 17.1). Based on the results, sawdust is the most suitable byproduct for pellet and briquette production
Disciplinas: Agrociencias
Palabras clave: Silvicultura,
Pino,
Madera,
Subproductos,
Aserrín,
Viruta,
Biocombustibles,
Bioenergía,
Michoacán,
México
Keyword: Agricultural sciences,
Silviculture,
Pine,
Wood,
Byproducts,
Sawdust,
Shaving,
Biofuels,
Bioenergy,
Michoacan,
Mexico
Texte intégral: Texto completo (Ver HTML)