Revue: | Ingeniería mecánica, tecnología y desarrollo |
Base de datos: | PERIÓDICA |
Número de sistema: | 000455923 |
ISSN: | 1665-7381 |
Autores: | Merez Melo, Marco Antonio1 Majewski, Tadeusz2 |
Instituciones: | 1Instituto Tecnológico de Puebla, Departamento de Metalmecánica, Puebla, Puebla. México 2Universidad de las Américas, Departamento de Ingeniería Mecánica e Industrial, Cholula, Puebla. México |
Año: | 2007 |
Volumen: | 2 |
Número: | 5 |
Paginación: | 157-163 |
País: | México |
Idioma: | Español |
Tipo de documento: | Artículo |
Enfoque: | Prospectivo |
Resumen en inglés | This paper shows a coupled system composed by an experimental rotor and autobalance system with one of two balls inside. These balls are positioned by themselves in position that compensate unbalances of rotor. This project studies behavior of rotor by Euler angles and its representative equations. The autobalance system is analyzed by Lagrange´s equation. Then a global equation system is performed. Simulation of the global system is gotten and experimental prototype is manufactured to compare simulation and experimental results. Finally the graphics where vibration amplitude reduction is significant are showed, these were gotten by mechanical vibration analysis equipment |
Disciplinas: | Ingeniería |
Palabras clave: | Ingeniería mecánica, Autobalance, Calibración automática, Modelos matemáticos, Rotores |
Keyword: | Automatic calibration, Autobalance, Mathematical models, Rotors |
Solicitud del documento | |