Revista: | Dyna (Medellín) |
Base de datos: | |
Número de sistema: | 000544231 |
ISSN: | 0012-7353 |
Autores: | Carrillo, Julián1 González, Giovanni1 Jiménez, Mauricio1 |
Instituciones: | 1Universidad Militar Nueva Granada, Bogotá. Colombia |
Año: | 2007 |
Periodo: | May-Ago |
Volumen: | 74 |
Número: | 152 |
Paginación: | 207-216 |
País: | Colombia |
Idioma: | Español |
Tipo de documento: | Artículo |
Resumen en español | En este artículo se presentan los resultados de una investigación analítica y computacional, donde se determina la variación de la deriva de edificios aporticados, teniendo en cuenta la resistencia a la compresión del núcleo de concreto obtenida en el laboratorio f’c(L), y la resistencia real f’c(R), calculada en función del diámetro de extracción de núcleos extraídos de concreto. Una vez se determinan los porcentajes de variación de las derivas con las resistencias corregidas y no corregidas, se relacionan estas variables con el porcentaje de variación de la resistencia y el diámetro de extracción para establecer el tipo de comportamiento existente. Finalmente, se obtienen ecuaciones que relacionan los parámetros en estudio, las cuales permiten al ingeniero estructural determinar el porcentaje en que se disminuye la deriva de una edificación, si ésta es modelada con la resistencia real a la compresión del concreto f’c(R) y no con la resistencia a la compresión del concreto obtenida del núcleo f’c(L). |
Resumen en inglés | The results of an analytical and computational investigation are described in this article, where the variation of the framed buildings drift determined, considering the nucleus compressive strength of concrete obtained in the laboratory f'c(L), and the real resistance f'c(R) which is calculated based on the diameter of concrete nuclei extraction. Once the percentages of the drift variations with the corrected and not corrected resistance are determined, the percentages of variation variables as the resistance and the diameter of extraction are related to establish the type of existing behavior. Finally, equations are obtained to relate the parameters in study, which allow the structural engineer to determine the percentage in that the drift of a construction is diminished, if this one is modeled with the real resistance of concrete compression f'c(R) and not with the concrete compression obtained of the nucleus f'c(L). |
Disciplinas: | Ingeniería |
Palabras clave: | Ingeniería civil |
Keyword: | Civil engineering |
Texto completo: | Texto completo (Ver HTML) Texto completo (Ver PDF) |