Revue: | Brazilian dental journal |
Base de datos: | PERIÓDICA |
Número de sistema: | 000290244 |
ISSN: | 0103-6440 |
Autores: | Obici, Andresa Carla1 Sinhoreti, Mario Alexandre Coelho Correr-Sobrinho, Lourenco Goes, Mario Fernando de Consani, Simonides |
Instituciones: | 1Universidade Estadual de Campinas, Faculdade de Odontologia, Piracicaba, Sao Paulo. Brasil |
Año: | 2004 |
Volumen: | 15 |
Número: | 3 |
Paginación: | 199-203 |
País: | Brasil |
Idioma: | Inglés |
Tipo de documento: | Artículo |
Enfoque: | Experimental |
Resumen en inglés | The aim of this study was to evaluate the depth of cure and Knoop hardness in the P60 composite resin photo-activated using different methods. A bipartite brass matrix (3 mm in diameter X 11 mm in height) was filled with the composite and photo-activation was performed using continuous light, exponential light, intermittent light, plasma arc curing (PAC) or light-emitting diodes (LED). After opening the matrix, the uncured material was removed with a steel spatula and the polymerized composite was measured using a pachymeter. The specimens were then included in self-curing acrylic resin and worn longitudinally and the hardness was measured on the surface and at depths of 1, 2, 3, 4 and 5 mm. The data were analyzed by ANOVA and Tukey's test (5%). The results showed that the depth of cure was higher with the intermittent light, followed by continuous light, exponential light, PAC and LED methods. Up to a depth of 2 mm, all methods revealed similar hardness values, but there were differences between them at other depths, at which LED demonstrated the lowest values followed by PAC |
Resumen en portugués | O objetivo deste trabalho foi avaliar a profundidade de polimerização e a dureza Knoop do compósito restaurador P60 fotoativado por diferentes métodos. Uma matriz metálica bipartida (3 mm de diâmetro X 11 mm de altura) foi preenchida com o compósito e fotoativada através da luz contínua, luz exponencial, luz intermitente, plasma de xenônio (PAC) ou luz emitida por diodo (LED). Após a abertura da matriz, o material não polimerizado foi removido com o auxílio de uma espátula metálica e o compósito polimerizado medido com um paquímetro digital. Então os espécimes foram incluídos em resina acrílica autopolimerizável e desgastados longitudinalmente e a dureza foi medida na superfície e nas profundidades de 1, 2, 3, 4 e 5 mm. Os dados foram analisados por ANOVA e teste de Tukey (5%). Os resultados mostraram que a profundidade de polimerização foi maior com a luz intermitente, seguida pela luz contínua, luz exponencial, PAC e LED. Até a profundidate de 2 mm, todos os métodos de fotoativação revelaram valores de dureza similares, porém diferiram a outras profundidades, onde o LED demonstrou os menores valores, seguido pelo PAC |
Disciplinas: | Medicina |
Palabras clave: | Odontología, Fotoactivación, Resinas compuestas, Materiales dentales, Dureza de Knoop, Métodos |
Keyword: | Medicine, Dentistry, Photoactivation, Composite resins, Dental materials, Knoop hardness, Methods |
Texte intégral: | Texto completo (Ver HTML) |