Journal: | Tecnologia em metalurgia, materiais e mineracao |
Database: | PERIÓDICA |
System number: | 000362320 |
ISSN: | 2176-1515 |
Authors: | Mello, Jose Daniel Biasoli1 Goncalves-Junior, Jose Lucio1 |
Institutions: | 1Universidade Federal de Uberlandia, Faculdade de Engenharia Mecanica, Uberlandia, Minas Gerais. Brasil |
Year: | 2012 |
Season: | Oct-Dic |
Volumen: | 9 |
Number: | 4 |
Pages: | 336-344 |
Country: | Brasil |
Language: | Portugués |
Document type: | Artículo |
Approach: | Aplicado, descriptivo |
English abstract | The present work analyzes the tribological behavior of surface modifications often used in cold rolling mill rolls. Different surface modifications were carried out on samples produced from a fragment of the rolling mill roll: i) texturing; ii) chromium plating; iii) texturing with subsequent hard chrome plating; iv) and hard chrome plating with subsequent texturing. Before the surface modifications the samples were heat treated and ground on both faces. Wear tests were performed using a reciprocating movement of a ball over flat configuration under a load of 9.8 N. It is observed that there is no significant change in the coefficient of friction as a function of surface modification. Surface texturing increases the wear of the counter body, while the hard chromium coating reduces it. The addition of hard chromium coating promotes the formation of a tribolayer on the counter body consisting of chromium and oxygen. On the other hand, for the samples without hard chrome coating, the tribolayer consists of iron and oxygen |
Portuguese abstract | O presente trabalho analisa o comportamento tribológico de modificações superficiais geralmente utilizadas em cilindros para laminação a frio. Amostras provenientes de cilindros reais foram tratadas termicamente, retificadas e modificadas superficialmente (cromagem, texturização, cromagem com posterior texturização e texturização com posterior cromagem). Os testes tribológicos foram realizados em modo alternado de deslizamento, utilizando a configuração de esfera (Aço SAE 52100) – plano utilizando-se carga de 9,8 N. Observa-se que não há alteração significativa do coeficiente de atrito, em função das modificações superficiais, e que a texturização promove um aumento significativo no desgaste do contracorpo, enquanto o revestimento de cromo duro promove uma redução do mesmo. A adição do revestimento de cromo duro promove a formação de uma tribocamada no contracorpo constituída de cromo e oxigênio. Em contrapartida, em corpos sem o recobrimento de cromo duro, ocorre a formação de uma tribocamada constituída de ferro e oxigênio no corpo |
Disciplines: | Ingeniería |
Keyword: | Ingeniería metalúrgica, Tribología, Laminado en frío, Cromo duro, Texturización |
Keyword: | Engineering, Metallurgical engineering, Tribology, Cold rolling, Hard chromium, Texturization |
Full text: | Texto completo (Ver HTML) |