| Revista: | Revista mexicana de física |
| Base de datos: | PERIÓDICA |
| Número de sistema: | 000460759 |
| ISSN: | 0035-001X |
| Autores: | Esquivel Mendez, L.A1 Albor Aguilera, M.L1 Ruiz Ortega, R.C1 González Trujillo, M.A2 Hernandez Vasquez, C2 Santoyo Salazar, J3 Tufiño Velázquez, M1 Rueda Morales, G1 Vigil Galán, O1 Contreras Puente, G1 |
| Instituciones: | 1Instituto Politécnico Nacional, Escuela Superior de Física y Matemáticas, Ciudad de México. México 2Instituto Politécnico Nacional, Escuela Superior de Cómputo, Formación Básica, Ciudad de México. México 3Instituto Politécnico Nacional, Centro de Investigación y de Estudios Avanzados, Ciudad de México. México |
| Año: | 2022 |
| Periodo: | May-Jun |
| Volumen: | 68 |
| Número: | 3 |
| País: | México |
| Idioma: | Inglés |
| Tipo de documento: | Artículo |
| Enfoque: | Analítico, teórico |
| Resumen en inglés | Abstrac: Polycrystalline CdTe thin films deposited in large areas present some difficulties, such as non-uniformity over the entire area. It is well known that the ratio between the thickness and grain size of CdTe thin films is approximately one. In contrast, the pin holes in CdTe should be minimized. CdS thin films as window materials must guarantee a uniform transparent film free of pinholes to avoid short-circuit in the photovoltaic device. In this work, CdTe and CdS thin films are reported in areas of 40 cm2 with optimal physical properties for potential application on solar cells. CdTe mini-modules were fabricated using CdTe and CdS layers obtained and characterized under outdoor conditions. The current-voltage measurements were performed under different load and solar irradiance conditions |
| Disciplinas: | Física y astronomía |
| Palabras clave: | Películas delgadas |
| Keyword: | Materials sciences, CdTe mini-modules, Solar cells, Thin films |
| Texto completo: | Texto completo (Ver HTML) Texto completo (Ver PDF) |
