Propiedades físicas de un Andosol mólico bajo labranza de conservación



Document title: Propiedades físicas de un Andosol mólico bajo labranza de conservación
Journal: Revista mexicana de ciencias agrícolas
Database: PERIÓDICA
System number: 000389290
ISSN: 2007-0934
Authors: 1
2
1
1
3
3
Institutions: 1Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias, Centro Nacional de Investigación Disciplinaria en Relación Agua-Suelo-Planta-Atmósfera, Gómez Palacio, Durango. México
2Universidad Nacional Autónoma de México, Instituto de Geologia, Juriquilla, Querétaro. México
3Colegio de Postgraduados, Montecillo, Estado de México. México
Year:
Season: Jul-Ago
Pages: 151-162
Country: México
Language: Español, inglés
Document type: Artículo
Approach: Analítico
Spanish abstract Las propiedades físicas de los Andosoles mólicos están condicionadas por una textura fina, aunque su contenido en arcilla no suele pasar de 20 a 25 %, escasas en arenas y tanto más cuanto mayor es la evolución. El conocimiento de su estabilidad estructural permite a los Andosoles mantener una estructura muy porosa (porosidad entre el 71 y 7 8 %) con una densidad aparente muy baja, entre 0.5 y 0.8 kg m-3, y una permeabilidad muy elevada. Cuando se secan las partículas primarias (arcillas) en los agregados se contraen fuertemente y por esta razón la capacidad de retención de agua puede reducirse hasta en 60% de la inicial. El objetivo fue evaluar los efectos de la labranza de conservación, sobre la humedad gravimétrica, la resistencia mecánica y la densidad aparente, como indicadores de la calidad física del Andosol bajo el manejo de labranza de conservación y labranza convencional en dos fechas del muestreo. El área de estudio se ubicó en la cuenca del lago de Pátzcuaro, Michoacán. Se tomaron muestras a una profundidad de 0 a 10 y de 10 a 20 cm. Se hizo un análisis estadístico completamente al azar, pruebas de medias por el método de Tukey y análisis de correlaciones Pearson. En la labranza de conservación se documentó el contenido máximo de la humedad gravimétrica (60.8%) durante el primer muestreo, porcentaje que disminuyó hasta 56.41%, cuatro años después cuando se realizó el segundo muestreo. Cabe mencionar que las diferencias en humedad del Andosol, son altamente significativas entre labranza convencional con labranza de conservación, en el primer muestreo (R2= 0.804), mientras que en el segundo muestreo, esta diferencia no fue estadísticamente significativa. Con el análisis estadístico se observó que la resistencia mecánica se incrementó de un muestreo (2001) al otro (2004) y que sus valores abarcan un amplio rango desde 184.4 hasta 274.9 kPa en labranza convencional, que se
English abstract The physical properties of mollic andosols are conditioned by a fine texture, although the clay content does not usually overpass 20 to 25%, poor in sands and the more the higher the evolution. The knowledge of its structural stability allows the andosols to maintaining a quite porous structure (Porosity between 71 and 78%) with a very low bulk density, between 0.5 and 0.8 kg m-3, and a very high permeability. When the primary particles get dried (clays) in the aggregates, they contract themselves quite strongly and for this reason the water holding capacity can be reduced up to 60% from the initial. The objective was to evaluate the effects of conservation tillage on gravimetric moisture, the mechanical resistance and bulk density as indicators of the physical quality of andosol, under conservation tillage management and conventional tillage in two sampling dates. The study area was located in the basin of Lake Patzcuaro, Michoacán. Samples of gravimetric moisture, mechanical resistance and bulk density were taken at a depth of 0 to 10 and 10 to 20 cm. A completely randomized statistical analysis, means tests by the method of Tukey and Pearson correlation analysis were done. In the conservation tillage management treatment, the maximum gravimetric moisture got documented (60.8%) during the first sample, the percentage decreased up to 56.41%, four years later, when the second sampling was performed. It is noteworthy that differences in the andosol's gravimetric moisture, are highly significant between conventional tillage with conservation tillage in the first sampling (R= 0.804), whereas in the second one, this difference was not statistically significant. According to the statistical analysis, it was shown that the mechanical resistance increased from one sampling (2001) to another (2004) and their values span a wide range from 184.4 to 274.9 kPa for the conventional tillage treatment, which is further increased
Disciplines: Agrociencias
Keyword: Suelos,
Andosol,
Propiedades fisicoquímicas,
Resistencia mecánica,
Humedad,
Densidad,
Labranza de conservación,
Calidad
Keyword: Agricultural sciences,
Soils,
Andosol,
Physicochemical properties,
Mechanical resistance,
Humidity,
Density,
Conservation tillage,
Quality
Full text: Texto completo (Ver PDF)