Journal: | Materials research |
Database: | PERIÓDICA |
System number: | 000312794 |
ISSN: | 1516-1439 |
Authors: | Braganca, Saulo Roca1 Bergmann, Carlos Perez |
Institutions: | 1Universidade Federal do Rio Grande do Sul, Laboratorio de Ceramicos, Porto Alegre, Rio Grande do Sul. Brasil |
Year: | 2005 |
Season: | Ene-Mar |
Volumen: | 8 |
Number: | 1 |
Pages: | 39-44 |
Country: | Brasil |
Language: | Inglés |
Document type: | Nota breve o noticia |
Approach: | Experimental |
English abstract | In this work, the feldspar used as a flux in typical porcelain was replaced by waste glass, and the resulting batch composition contained 50% kaolin, 25% quartz and 25% waste glass. The properties of this porcelain with glass powder (GP) were compared to traditional porcelain (TP), which utilizes feldspar. The samples were fired at different temperatures, ranging from 1200 °C to 1400 °C. Technical parameters, such as water absorption, modulus of rupture and K IC, phase analysis by XRD, and microstructure by SEM were analysed. The results indicated that the lower fracture toughness and MOR of GP is a consequence of the peculiar microstructure of this porcelain. The reduction in firing temperature and the use of a cheaper substitute for feldspar makes GP also an attractive economical alternative |
Disciplines: | Ingeniería |
Keyword: | Ingeniería de materiales, Ingeniería mecánica, Porcelana, Residuos industriales, Vidrio, Propiedades mecánicas, Microestructuras, Tenacidad |
Keyword: | Engineering, Materials engineering, Mechanical engineering, Porcelain, Industrial wastes, Glass, Mechanical properties, Microstructures, Toughness |
Full text: | Texto completo (Ver HTML) |