Journal: | Journal of the Brazilian Chemical Society |
Database: | PERIÓDICA |
System number: | 000310903 |
ISSN: | 0103-5053 |
Authors: | Prasad, Shiva1 |
Institutions: | 1Universidade Federal da Paraiba, Departamento de Engenharia Quimica, Campina Grande, Paraiba. Brasil |
Year: | 2000 |
Season: | Jun |
Volumen: | 11 |
Number: | 3 |
Pages: | 245-251 |
Country: | Brasil |
Language: | Inglés |
Document type: | Artículo |
Approach: | Experimental, aplicado |
English abstract | Studies on the electrolysis of cryolite-alumina melt showed that even the best equipped smelter, functioning at 960 ºC, has only 33% energy efficiency. For stable functioning of the smelter at 3% alumina the minimum wt% ratio NaF/AlF3 was found to be 1.11. The anodes located on down-stream row were found to face more turbulence; raising their level by 4 cm resulted in decreasing the number of burnoffs. A careful selection of potlining material improved the pot life. The stability of the aluminum-bath interface is one of the major factors affecting the current efficiency. An improved cell design has been proposed to achieve the ultimate aluminum-bath interface stability. The proposed cell design should allow a reduction of the cathode-to-anode distance producing a lower voltage and improving the power efficiency |
Portuguese abstract | Estudos da eletrólise da criolita-alumina fundida mostraram que nas melhores condições de operação, a 960ºC, a eficiência energética é de apenas 33%. Encontrou-se que para o funcionamento estável da célula a 3% de alumina a relação NaF/AlF3, em peso-percentual, deve ser no mínimo 1,11. Encontrou-se ainda que a fileira de ânodos posicionada junto a down-stream está sujeita a uma turbulência mais intensa, de modo que elevando-se o nível desta fileira em 4 cm, resulta em uma diminuição no número de burnoffs. A seleção cuidadosa do material de revestimento da célula aumentou sua vida útil. A estabilidade da interface alumínio-banho é um dos principais fatores que afetam a eficiência de corrente. Uma modificação na célula foi proposta para se ter uma melhor estabilidade na interface alumínio-banho. O novo desenho proposto para a célula permite uma redução da distância cátodo-ânodo, diminuindo a voltagem e consequentemente, melhorando a eficiência anódica |
Disciplines: | Ingeniería, Química |
Keyword: | Ingeniería metalúrgica, Extracción electrolítica, Criolita-alúmina, Aluminio, Proceso Hall-Heroult, Electrorreducción |
Keyword: | Engineering, Chemistry, Metallurgical engineering, Electrowinning, Cryolite-alumina, Aluminum, Hall-Heroult process, Electroreduction |
Full text: | Texto completo (Ver HTML) |