Estudo comparativo entre a agressividade superficial obtida na retificação com rebolos de óxido de alumínio e CBN, fabricados com ligantes resinóide e vitrificado



Document title: Estudo comparativo entre a agressividade superficial obtida na retificação com rebolos de óxido de alumínio e CBN, fabricados com ligantes resinóide e vitrificado
Journal: Ceramica (Sao Paulo)
Database: PERIÓDICA
System number: 000341467
ISSN: 0366-6913
Authors: 1
1
1
1
1
Institutions: 1Universidade Estadual Paulista "Julio de Mesquita Filho", Faculdade de Engenharia, Bauru, Sao Paulo. Brasil
Year:
Season: Oct-Dic
Volumen: 57
Number: 344
Pages: 431-437
Country: Brasil
Language: Portugués
Document type: Artículo
Approach: Experimental, aplicado
English abstract This paper presents a study of the grinding wheel sharpness (cutting ability). Grinding is a precision machining process which is widely used in the manufacture of components requiring fine tolerances and smooth surfaces. In grinding, the abrasive tool is the grinding wheel, which is basically compounded by the core, the bond and the abrasive grains. The tools tested in this research were conventional (Al2O3) and superabrasive (CBN) grinding wheels. Among the superabrasive ones, three specific bond types were tested: resin, vitrified and high performance resin bond. Consequently, it was possible to evaluate the comparative cutting ability among the different types of grinding wheels tested. So the conventional wheel (Al2O3) presented the highest sharpness
Portuguese abstract Este artigo apresenta um estudo da agressividade do rebolo (habilidade de corte). A retificação é um processo de usinagem preciso, o qual é amplamente usado na manufatura de componentes que requerem tolerâncias estreitas e superfícies bem acabadas. Na retificação, a ferramenta abrasiva é o rebolo, que é basicamente composto por núcleo, ligante e grãos abrasivos. As ferramentas testadas nessa pesquisa foram rebolos convencional (Al2O3) e superabrasivo (CBN). Entre os superabrasivos, três tipos específicos de ligantes foram testados: resinóide, vitrificado e resinóide de alto desempenho. Conseqüentemente, foi possível avaliar a habilidade de corte entre os diferentes tipos de rebolos testados. Assim, o rebolo convencional de óxido de alumínio apresentou a maior agressividade
Disciplines: Ingeniería
Keyword: Ingeniería de materiales,
Ingeniería mecánica,
Rueda de molino,
Ligantes,
Abrasivos,
Oxido de aluminio
Keyword: Engineering,
Materials engineering,
Mechanical engineering,
Grinding wheel,
Ligands,
Abrasives,
Aluminum oxide
Full text: Texto completo (Ver HTML)