Influence of casting methods on marginal and internal discrepancies of complete cast crowns



Document title: Influence of casting methods on marginal and internal discrepancies of complete cast crowns
Journal: Brazilian dental journal
Database: PERIÓDICA
System number: 000290245
ISSN: 0103-6440
Authors: 1



2
3
Institutions: 1Universidade Estadual de Campinas, Faculdade de Odontologia, Piracicaba, Sao Paulo. Brasil
2Universidade de Ribeirao Preto, Faculdade de Odontologia, Ribeirao Preto, Sao Paulo. Brasil
3University of London, Eastman Dental Institute, Londres. Reino Unido
Year:
Volumen: 15
Number: 2
Pages: 127-132
Country: Brasil
Language: Inglés
Document type: Artículo
Approach: Experimental
English abstract The relationship between the application of die-spacer prior to wax pattern fabrication and metal removal from the inner surface of the casting on marginal and internal discrepancies of complete cast crowns was evaluated. One hundred and twenty complete crowns were cast with palladium-silver alloy melted by gas-oxygen torch or electrical resistance and cast with a centrifuge casting machine. After casting, the crowns were seated on each type of different marginal configuration dies (90-degree shoulder, 20-degree beveled shoulder, and 45-degree chamfered shoulder) with a static load of 90 N during 1 min. Evaluation of the marginal fit of the specimens was made using a digital micrometer. The crowns were embedded in acrylic resin and longitudinally sectioned to verify the internal discrepancy that occurred in lateral and occlusal interfaces with a digital micrometer. The data were submitted to ANOVA and Tukey's test with a significance level of 5%. The best marginal and inner fits were obtained with the gas-oxygen torch source. The 45-degree chamfered shoulder showed the best marginal and inner fit, and better internal relief was obtained in the crowns abraded with 50 µm Al2O3 particles
Portuguese abstract A relação entre a aplicação do espaçador antes do enceramento do padrão e alívio interno das coroas totais metálicas após a fundição foi verificada através da análise da discrepância interna e marginal. Cento e vinte coroas totais metálicas foram confeccionadas com liga de paládio/prata, fundidas com gás-oxigênio ou resistência elétrica numa centrifuga. Após a fundição, as coroas foram assentadas sobre seus respectivos troquéis com diferentes términos cervicais (ombro reto, ombro biselado em 20º e chanfro reto em 45º) com carga estática de 90 N por 1 minuto. Após, o conjunto foi embutido em resina acrílica e seccionado longitudinalmente para verificar a discrepância marginal ocorrida nas interfaces lateral e oclusal com o micrômetro digital. Os dados foram submetidos a análise de variância e ao teste de Tukey em nível de significância de 5%. Os melhores ajustes marginais e internos foram obtidos com a fonte de calor gás-oxigênio. O término cervical em chanfro reto de 45º mostrou os melhores ajustes, tanto cervical como interno, e o melhor alívio interno e marginal foram obtidos em coroas jateadas com partículas de Al2O3 com 50 µm
Disciplines: Medicina
Keyword: Medicina experimental,
Odontología,
Aleaciones dentales,
Moldeo,
Técnicas,
Coronas dentales
Keyword: Medicine,
Dentistry,
Experimental medicine,
Dental alloys,
Casting,
Techniques,
Dental crowns
Full text: Texto completo (Ver HTML)