Revista: | Biotecnia |
Base de datos: | PERIÓDICA |
Número de sistema: | 000439273 |
ISSN: | 1665-1456 |
Autores: | Torres Salcido, Cristian Enrique Rodríguez León, Ericka Castillo Ortega, María Mónica1 Ramírez Bon, Rafael2 Moreno Corral, Ramón1 Burruel Ibarra, Silvia Elena1 Corella Madueño, María Alba Guadalupe Armenta Villegas, Lorena |
Instituciones: | 1Universidad de Sonora, Departamento de Ciencias Químico Biológicas, Hermosillo, Sonora. México 2Instituto Politécnico Nacional, Centro de Investigación y de Estudios Avanzados, Querétaro. México |
Año: | 2020 |
Volumen: | 22 |
Número: | 3 |
País: | México |
Idioma: | Inglés |
Tipo de documento: | Artículo |
Enfoque: | Experimental, aplicado |
Resumen en español | El método de electrohilado es ampliamente utilizado para desarrollar biomateriales útiles en medicina regenerativa. La adición de compuestos bioactivos a matrices poliméricas les confiere propiedades que fomentan su uso en aplicaciones biomédicas. En este trabajo se prepararon y caracterizaron fibras electrohiladas de Poli(ácido láctico) (PLA) adicionadas con extracto de Rumex hymenosepalus con el objetivo de obtener un material novedoso con uso potencial como apósitos para heridas. Se obtuvieron fibras utilizando distintos parámetros y se seleccionaron las fibras obtenidas utilizando un rotor con velocidad de flujo de 0.6 mL/h y 15 kV de voltaje para continuar el estudio. La morfología de las fibras se examinó por microscopia electrónica de barrido y se determinaron los diámetros promedio. Se realizó una hidrólisis alcalina para mejorar la interacción de las fibras electrohiladas y el extracto de R. hymenosepalus. El estudio FTIR-ATR permitió evaluar la interacción de las fibras de PLA y PLA hidrolizado con el extracto de R. hymenosepalus. Los resultados del estudio de liberación por espectroscopia UV-vis mostraron que la hidrólisis alcalina ayuda a controlar la velocidad liberación del R. hymenosepalus. Los resultados obtenidos muestran que las fibras PLA-R. hymenosepalus tienen posible utilidad en aplicaciones de liberación de antioxidantes como apósitos para heridas |
Resumen en inglés | Electrospinning method is widely used to develop biomaterials useful in regenerative medicine. The addition of bioactive compounds to a polymeric matrix provides properties that promote its use in biomedical applications. In this work poly(lactic acid) (PLA) electrospun (ES) fibers loaded with Rumex hymenosepalus extract were prepared and characterized with the aim of obtained a novelty material for potential wound dressings applications. ES PLA fibers were obtained using parameter variations and fibers obtained with a flow rate of 0.6 mL/h and voltage of 15 kV using a rotating drum were selected to continue the study. The fibers morphology was analyzed with scanning electron microscopy and their diameters were measured using ImageJ software. An alkaline hydrolysis was performed to improve the interaction sites of the ES fibers and R. hymenosepalus extract. FTIR-ATR study was performed to evaluate the behavior of the PLA and PLA hydrolyzed (PLA/H) fibers and its interaction with the extract. Antioxidant release study was carried out using UV-vis spectroscopy and with this evaluation it was determined that the alkaline hydrolysis helped to control the R. hymenosepalus release rate. These results show that obtained PLA-R. hymenosepalus fibers have potential use in antioxidant release applications like wound dressings |
Disciplinas: | Ingeniería, Biología |
Palabras clave: | Ingeniería biónica y cibernética, Angiospermas, Rumex hymenosepalus, Biomateriales, Electrohilado, Hidrólisis, Antioxidantes, Biomedicina |
Keyword: | Bionics and cybernetics, Angiosperms, Rumex hymenosepalus, Electrospinning, Hydrolysis, Antioxidants, Biomedicine |
Texto completo: | https://biblat.unam.mx/hevila/Biotecnia/2020/vol22/no3/14.pdf Texto completo (Ver HTML) Texto completo (Ver PDF) |