Journal of the Brazilian Society of Mechanical Sciences and Engineering (226 documentos)


1.- A computational methodology for automatic two-dimensional anisotropic mesh generation and adaptation
Lyra, Paulo Roberto M1; Carvalho, Darlan Karlo E. de2
1Universidade Federal de Pernambuco, Departamento de Engenharia Mecanica, Recife, Pernambuco. Brasil; 2Universidade Federal de Pernambuco, Departamento de Engenharia Civil, Recife, Pernambuco. Brasil
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 399-412]
2.- An integrated control for a biped walking robot
Goncalves, Joao B1; Zampieri, Douglas Eduardo2
1Universidade de Taubate, Departamento de Engenharia Eletrica, Taubate, Sao Paulo. Brasil; 2Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica, Campinas, Sao Paulo. Brasil
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 453-460]
3.- Applied nonlinear dynamics of non-smooth mechanical systems
Wiercigroch, Marian1
1University of Aberdeen, Department of Engineering, Aberdeen. Reino Unido
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 519-526]
4.- A specialized genetic algorithm for the electrical impedance tomography of two-phase flows
Rolnik, Vanessa P1; Seleghim-Junior, Paulo2
1Universidade de Sao Paulo, Faculdade de Filosofia, Ciencias e Letras, Ribeirao Preto, Sao Paulo. Brasil; 2Universidade de Sao Paulo, Faculdade de Engenharia, Sao Carlos, Sao Paulo. Brasil
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 378-389]
5.- Comparison of some mechanical models of larynx in the synthesis of voiced sounds
Cataldo, Edson1; Lucero, Jorge Carlos2; Sampaio, Rubens3; Nicolato, Lucas4
1Universidade Federal Fluminense, Departamento de Matematica Aplicada, Niteroi, Rio de Janeiro. Brasil; 2Universidade de Brasilia, Departamento de Matematicas, Brasilia, Distrito Federal. Brasil; 3Pontificia Universidade Catolica do Rio de Janeiro, Departamento de Engenharia Mecanica, Rio de Janeiro. Brasil; 4Universidade Federal Fluminense, Departamento de Engenharia de Telecomunicacoes, Niteroi, Rio de Janeiro. Brasil
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 461-466]
6.- Dedicated procedures for temporal identification in a flexible multi-body system
Gouveia, Giovanni M1; Lemosse, Didier; Pagnacco, Emmanuel; Cursi, Eduardo S. de1; Dujardin, Franck2
1Institut National des Sciences Appliquees, Laboratoire de Mecanique, Rouen. Francia; 2CHU Hopitaux de Rouen, Rouen. Francia
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 467-473]
7.- Dynamic analysis of silicon micromachined double-rotor scanning mirror
Oliveira, Luiz Claudio M1; Ahmida, Khaled M; Ferreira, Luiz Otavio S1
1Universidade Estadual de Campinas, Departamento de Engenharia Mecanica, Campinas, Sao Paulo. Brasil
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 443-447]
8.- Extremal disturbance analysis for dynamical systems with uncertain input
Pilkey, Walter D1; Balandin, Dmitry V2; Bolotnik, Nikolai N3; Purtsezov, Sergey V
1University of Virginia, Department of Mechanical and Aerospace Engineering, Charlottesville, Virginia. Brasil; 2Nizhny Novgorod State University, Dep. of Comp. Mathematics and Cybernetics, Nizhny Novgorod. Rusia; 3Russian Academy of Sciences, Institute for Problems in Mechanics, Moscú. Rusia
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 512-518]
9.- Foam flow of oil-refrigerant R12 mixture in a small diameter tube
Poiate-Junior, Edgard1; Gasche, Jose Luiz2
1Petroleo Brasileiro S.A, Rio de Janeiro. Brasil; 2Universidade Estadual Paulista "Julio de Mesquita Filho", Departamento de Engenharia Mecanica, Ilha Solteira, Sao Paulo. Brasil
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 390-398]
10.- Kinematical modeling and optimal design of a biped robot joint parallel linkage
Menegaldo, Luciano L1; Santana, Rogerio Eduardo S2; Fleury, Agenor de Toledo3
1Instituto Militar de Engenharia, Rio de Janeiro. Brasil; 2Universidade de Sao Paulo, Escola Politecnica, Sao Paulo. Brasil; 3Centro Universitario da FEI, Departamento de Engenharia Mecanica, Sao Bernardo do Campo, Sao Paulo. Brasil
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 505-511]
11.- Lateral dynamics and stability analysis of a gas compressor supported by hybrid and active lubricated multirecess journal bearing
Santos, Ilmar F1; Watanabe, Flavio Y2
1Technical University of Denmark, Department of Engineering, Lyngby. Dinamarca; 2Universidade Metodista de Piracicaba, Santa Barbara d'Oeste, Sao Paulo. Brasil
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 485-495]
12.- Modified Lyapunov equations for LTI descriptor systems
Muller, Peter C1
1Bergische Universitat Wuppertal, Safety Control Engineering, Wuppertal, Nordrhein-Westfalen. Alemania
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 448-452]
13.- Optimal space maneuvers in three dimensions
Schulz, Walkiria1; Prado, Antonio F.B. Almeida
1Instituto Nacional de Pesquisas Espaciais, Sao Jose dos Campos, Sao Paulo. Brasil
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 375-377]
14.- Parametric optimization of wire electrical discharge machining (WEDM) process using Taguchi method
Mahapatra, Swarup S1; Patnaik, Amar2
1National Institute of Technology, Department of Mechanical Engineering, Rourkela, Orissa. India; 2Gandhi Institute of Engineering and Technology, Department of Mechanical Engineering, Gunupur, Orissa. India
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 422-429]
15.- Steady state simulation of the operation of an evaporative cooled water-ammonia absorption scale ice maker with experimental basis
Silverio, Rodolfo Jesus R1; Figueiredo, Jose Ricardo2
1Faculdade de Aracruz, Aracruz, Espirito Santo. Brasil; 2Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica, Campinas, Sao Paulo. Brasil
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 413-421]
16.- The Lagrange equations for systems with mass varying explicitly with position: some applications to offshore engineering
Tannuri, Eduardo A1; Pesce, Celso P; Casetta, Leonardo1
1Universidade de Sao Paulo, Escola Politecnica, Sao Paulo. Brasil
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 496-504]
17.- Unsteady aerodynamic forces for aeroelastic analysis of two-dimensional lifting surfaces
Marques, Alexandre N1; Simoes, Carlos Frederico C2; Azevedo, Joao Luiz F3
1Instituto Tecnologico de Aeronautica, Sao Jose dos Campos, Sao Paulo. Brasil; 2Empresa Brasileira de Aeronautica S.A., Sao Jose dos Campos, Sao Paulo. Brasil; 3Instituto de Aeronautica e Espaco, Sao Jose dos Campos, Sao Paulo. Brasil
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 474-484]
18.- Vehicle modeling by subsystems
Rill, Georg1
1University of Applied Sciences, Regensburg. Alemania
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 4 Oct-Dic, Pag. 430-442]
19.- Adaptive techniques applied to offshore dynamic positioning systems
Tannuri, Eduardo A1; Kubota, Leonardo K1; Pesce, Celso P2
1Universidade de Sao Paulo, Departamento de Engenharia Naval e Oceanica, Sao Paulo. Brasil; 2Universidade de Sao Paulo, Escola Politecnica, Sao Paulo. Brasil
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 3 Jul-Sep, Pag. 323-330]
20.- Analytical and numerical approaches to study the gravitational capture in the four-body problem
Prado, Antonio F.B. de A1
1Instituto Nacional de Pesquisas Espaciais, Sao Jose dos Campos, Sao Paulo. Brasil
[Journal of the Brazilian Society of Mechanical Sciences and Engineering, Brasil, 2006 Vol. 28 Num. 3 Jul-Sep, Pag. 347-353]