Revista: | Revista mexicana de física |
Base de datos: | PERIÓDICA |
Número de sistema: | 000350651 |
ISSN: | 0035-001X |
Autores: | Méndez Maldonado, G.A1 González Melchor, M2 Alejandre, J3 Chapela, G.A4 |
Instituciones: | 1Benemérita Universidad Autónoma de Puebla, Facultad de Ciencias Físico Matemáticas, Puebla. México 2Benemérita Universidad Autónoma de Puebla, Instituto de Física "Luis Rivera Terrazas", Puebla. México 3Universidad Autónoma Metropolitana, Departamento de Química, Iztapalapa, Distrito Federal. México 4Universidad Autónoma Metropolitana, Departamento de Física, Iztapalapa, Distrito Federal. México |
Año: | 2012 |
Periodo: | Feb |
Volumen: | 58 |
Número: | 1 |
Paginación: | 55-60 |
País: | México |
Idioma: | Inglés |
Tipo de documento: | Artículo |
Enfoque: | Analítico, teórico |
Resumen en español | Realizamos simulaciones de dinamica molecular en fluidos a condiciones supercrıticas para analizar el efecto que la velocidad del centro de masa (VCM) del sistema tiene sobre la temperatura y la estabilidad de fases. Escalamiento estandar de velocidades y cadenas de Nose-Hoover son usados como metodos de termostato para realizar simulaciones en modelos de potencial de pozo cuadrado, Lennard-Jones y el modelo primitivo suave. Remover la VCM al inicio o durante la simulacion no es requerido para que el termostato de cadenas de Nose-Hoover mantenga la temperatura correcta del sistema, sin embargo es fundamental mantener nula la VCM cuando se usa el esquema tradicional de escalamiento de velocidades. Se muestra que si la VCM es removida solo al inicio de la simulacion las temperaturas interna y externa no son iguales para tiempos de simulacion muy grandes y el sistema se solidifica. La temperatura y las propiedades f´ısicas obtenidas usando el metodo de cadenas de Nose-Hoover son iguales a aquellas obtenidas usando escalamiento de velocidades donde se remueve la VCM durante la simulacion |
Resumen en inglés | Molecular dynamics simulations are performed on a fluid at supercritical conditions to analyze the effect that the velocity of centre of mass (VCOM) of the system has on temperature and phase stability. Standard rescaling velocities and Nos´e-Hoover chains of thermostats methods are used to carry out simulations on SquareWell, Lennard-Jones and Soft Primitive potential models. Removing the VCOM at the beginning or during the simulation is not required for the Nos´e-Hoover chain of thermostats to keep the correct temperature of the system, however, it is fundamental to keep null the VCOM when the traditional rescaling velocity scheme is used. It is shown that if the VCOM is removed only at the beginning of the simulation the internal and external temperatures are not the same for very long simulations and the fluid becomes a solid. The temperatures and physical properties obtained using the Nos´e-Hoover chain method are the same as those obtained by removing the VCOM during the simulation in the rescaling velocity procedure |
Disciplinas: | Física y astronomía |
Palabras clave: | Mecánica, elasticidad y reología, Dinámica molecular, Escalamiento de velocidades, Cadenas de Nosé-Hoover, Velocidad de centro de masa |
Keyword: | Physics and astronomy, Mechanics, elasticity and rheology, Molecular dynamics, Scaling velocities, Nose-Hoover chains, Center of mass velocity |
Texto completo: | Texto completo (Ver PDF) |