| Revista: | Materials research |
| Base de datos: | PERIÓDICA |
| Número de sistema: | 000312486 |
| ISSN: | 1516-1439 |
| Autores: | Tomba Martinez, A.G1 Cavalieri, A.L |
| Instituciones: | 1Universidad Nacional de Mar del Plata, Facultad de Ingeniería, Mar del Plata, Buenos Aires. Argentina |
| Año: | 2001 |
| Periodo: | Ene |
| Volumen: | 4 |
| Número: | 1 |
| Paginación: | 7-12 |
| País: | Brasil |
| Idioma: | Español |
| Tipo de documento: | Artículo |
| Enfoque: | Experimental |
| Resumen en inglés | Disks of a commercial alumina were fabricated by slip casting, calcination and sintering. The surfaces were machined using SiC papers (120 and 320 grit) and characterized by residual stresses measurements. The mechanical strength was determined in biaxial flexure (ball on discontinuous ring). The specimens were subjected to thermal shock conditions (cooling using a high-velocity air jet) and the critical temperature differential for crack propagation was determined. The temperature and stress distributions during air impinging were calculated using a finite element method. The value of the heat transfer coefficient was estimated by fitting the calculated temperature profiles with those measured during each test. The calculated tension for the thermal shock fracture was compared with the mechanical strength, together with the fracture features in each case. The differences were explained on the basis of the calculated stress distributions |
| Disciplinas: | Ingeniería, Física y astronomía |
| Palabras clave: | Ingeniería de materiales, Ingeniería mecánica, Mecánica, elasticidad y reología, Elementos finitos, Materiales cerámicos, Choque térmico |
| Keyword: | Engineering, Physics and astronomy, Materials engineering, Mechanical engineering, Mechanics, elasticity and rheology, Finite elements, Ceramic materials, Thermal shock |
| Texto completo: | Texto completo (Ver HTML) |
