The effect of some technological production variables on mechanical and physical properties of particleboard manufactured from cotton (Gossypium hirsutum) stalks
Título del documento: The effect of some technological production variables on mechanical and physical properties of particleboard manufactured from cotton (Gossypium hirsutum) stalks
Revista: Maderas : ciencia y tecnología
Base de datos:
Número de sistema: 000544707
ISSN: 0718-221X
Autores: 1
1
1
1
Instituciones: 1University of Zabol, Dept. of Wood and Paper Science and Technology, Zabol. Irán
Año:
Periodo: Ene
Volumen: 18
Número: 1
Paginación: 167-178
País: Chile
Idioma: Inglés
Resumen en inglés The current study aims to improve properties of particleboard manufactured from cotton (Gossium hirsutum) stalks glued with urea formaldehyde. To this aim, panel density (at three levels: 0,5; 0,65 and 0,8 g/cm³), press temperature (at two levels: 150 and 180°C) and press closing speed (at two levels: 4 and 8 mm/s) were selected as independent variables. The mechanical properties consist of modulus of rupture, modulus of elasticity and internal bonding and physical behaviors such as water absorption and thickness swelling of panels were determined. Results showed that with increasing the density of panels and press temperature modulus of rupture, modulus of elasticity and internal bonding of panels increased, while bending strengths of panels were differently affected by press closing speed compared to the internal bonding, so that with increasing the press closing speed modulus of rupture increased, but internal bonding decreased. Moreover, increasing panel density and press temperature, water absorption and thickness swelling of panels decreased. The press closing speed affected the water absorption and thickness swelling, insignificantly.
Keyword: Cotton stalks,
Density,
Mechanical properties,
Particleboard,
Physical properties,
Press closing speed
Texto completo: Texto completo (Ver HTML) Texto completo (Ver PDF)