| Revista: | Maderas : ciencia y tecnología |
| Base de datos: | |
| Número de sistema: | 000534435 |
| ISSN: | 0718-221X |
| Autores: | Hazir, Ender1 Koc, Kucuk Huseyin1 |
| Instituciones: | 1Istanbul University-Cerrahpasa Faculty of Forestry Department of Forest Industry Engineering, Istanbul. Turkey |
| Año: | 2021 |
| Volumen: | 23 |
| País: | Chile |
| Idioma: | Inglés |
| Resumen en inglés | In this study, the effects of two different coating processes on the surface coating performance of wood-based panels were investigated. The samples were prepared using an ultraviolet roller coater and conventional air-atomized systems. Adhesion strength, surface coating hardness, and layer thickness were selected as the coating performance parameters. These coating performance parameters were analyzed using an analysis of variance, Grubb’s test, and probability plot. Adhesion strength, surface coating hardness, and layer thickness were measured using the pull-off test, pendulum hardness, and ultrasonic layer thickness, respectively. According to the ANOVA results, the coating process type was the most significant factor on adhesion strength, layer thickness, and surface coating hardness. |
| Keyword: | Adhesion strength, Atomization coating process, Layer hardness, Layer thickness, Roller coating process, Ultraviolet paints. |
| Texto completo: | Texto completo (Ver HTML) Texto completo (Ver PDF) |
