| Revista: | Ingeniería mecánica, tecnología y desarrollo |
| Base de datos: | PERIÓDICA |
| Número de sistema: | 000455941 |
| ISSN: | 1665-7381 |
| Autores: | Rodríguez Lelis, J. M1 Ocampo, Miguel A1 Abúndez Pliego, A1 1 |
| Instituciones: | 1Centro Nacional de Investigación y Desarrollo Tecnológico, Departamento de Ingeniería Mecánica, Cuernavaca, Morelos. México |
| Año: | 2007 |
| Volumen: | 2 |
| Número: | 5 |
| Paginación: | 164-168 |
| País: | México |
| Idioma: | Español |
| Tipo de documento: | Artículo |
| Enfoque: | Analítico |
| Resumen en inglés | In this paper, a qualitative analysis of stress distribution in a cross section of the human femur is presented. The architecture of the bone tissue internal structure was obtained by mean Radial Holes Method and Finite Element models was made. The analysis reults show that areas of stress concentration are shifted from the contact surface to the interior of bone tissue to difference of solid models. Therefore, bone tissue allows the damping of external forces and diffuee them towards the interior of bone structure, thus reducing contact stresses at the surfaces of the joints that involve femur |
| Disciplinas: | Física y astronomía |
| Palabras clave: | Distribución de carga, Estructura trabecular, Fémur, Humanos, Transferencia de carga |
| Keyword: | Cancellous bone, Load distribution, Charge transfer, Femur, Humans, Trabecular structure |
| Solicitud del documento | |
