Effect of Annealing Temperature on the microstructure of hyperduplex stainless steels



Título del documento: Effect of Annealing Temperature on the microstructure of hyperduplex stainless steels
Revista: Ingeniería. Investigación y tecnología
Base de datos: PERIÓDICA
Número de sistema: 000438716
ISSN: 1405-7743
Autores: 1
1
Instituciones: 1Instituto Tecnológico de Veracruz, Veracruz. México
Año:
Periodo: Abr-Jun
Volumen: 20
Número: 2
País: México
Idioma: Inglés
Tipo de documento: Artículo
Enfoque: Experimental, aplicado
Resumen en español Muestras de acero inoxidable hiperdúplex fueron fabricadas experimentalmente y sometidas a diferentes tratamientos térmicos de recocido para obtener el balance microestructural de 50% ferrita y 50% austenita. Para diferenciar a la ferrita y austenita de fases secundarias, se utilizó un ataque selectivo y se cuantificó el porcentaje de fases mediante metalografía cuantitativa. Los resultados mostraron que los tratamientos térmicos convencionales promueven la transformación de la ferrita a fase sigma y austenita secundaria, sugiriendo una mayor susceptibilidad a la formación de fase sigma en las aleaciones hiperdúplex en comparación con las aleaciones dúplex debido al alto contenido de cromo y molibdeno. Para obtener la microestructura balanceada de ferrita y austenita, se aplicó un tratamiento térmico a mayor temperatura, lo que permitió la transformación de ferrita y austenita sin la formación de fases secundarias
Resumen en inglés Samples of hyperduplex stainless steels were produced experimentally and exposed to different conventional annealing heat treatments in order to obtain the microstructural balance of 50% ferrite and 50% austenite. To differentiate the ferrite and austenite from any secondary phase, selective etching was used and quantitative metallography was performed to measure the percentage of phases. Results showed that conventional annealing heat treatments promote the transformation from ferrite to sigma phase and secondary austenite, suggesting a higher occurrence of sigma phase in the experimental hyperduplex alloys compared to other duplex alloys due to the superior content of chromium and molybdenum. On the other hand, a balanced microstructure free of secondary phases was accomplished increasing the temperature of the annealing heat treatment, which allowed the transformation of ferrite into austenite during cooling
Disciplinas: Ingeniería
Palabras clave: Ingeniería civil,
Materiales de construcción,
Acero inoxidable hiperdúplex,
Recocido,
Fase sigma,
Balance microestructural
Keyword: Civil engineering,
Construction materials,
Hyperduplex stainless steel,
Annealing,
Sigma phase,
Microstructural balance
Texto completo: Texto completo (Ver HTML) Texto completo (Ver PDF)