Revista: | Dyna (Medellín) |
Base de datos: | |
Número de sistema: | 000544134 |
ISSN: | 0012-7353 |
Autores: | HIGUERA COBOS, OSCAR FABIÁN1 MORENO TELLEZ, CARLOS MAURICIO2 RAMIREZ MONTES, CAROLINA1 |
Instituciones: | 1Universidad Tecnológica de Pereira, 2Universidad Pedagógica y Tecnológica de Colombia, grupo de Integridad y Evaluación de Materiales, |
Año: | 2010 |
Periodo: | Dic |
Volumen: | 77 |
Número: | 164 |
Paginación: | 76-87 |
País: | Colombia |
Idioma: | Español |
Resumen en español | En este trabajo de investigación se estudió el efecto del precalentamiento y la severidad de temple sobre la resistencia al desgaste adhesivo del acero austenítico al manganeso ASTM A 128 grado C. El material se sometió a ciclos térmicos de temple y revenido con y sin precalentamiento con el fin de evaluar su influencia sobre la resistencia al desgaste. Posteriormente el material fue sometido a prueba según norma ASTM G-83 y se determinó que el acero Austenítico al manganeso, es un material que presenta una microestructura metaestable en condiciones estables y no debe ser sometido a tratamiento térmico de revenido a altas temperaturas debido que favorece la descomposición de esta a ferrita (fase blanda de los acero) y por ende disminuye su resistencia al desgaste. |
Resumen en inglés | In this research we studied the effect of preheating and tempering the severity of the adhesive wear resistance of austenitic manganese steel ASTM A 128 degree C. The material was subjected to thermal cycles of quenching and tempering with and without preheating in order to assess their influence on the wear resistance. Subsequently the material was tested according to ASTM G-83 and found that the austenitic manganese steel, a material that presents a metastable microstructure in a stable condition and should not be subjected to heat treatment of high-tempered temperatures because it promotes a decomposition of the ferrite (soft phase of the steel) and therefore reduces its wear resistance. |
Palabras clave: | Tribología, Desgaste adhesivo, Acero austenítico al manganeso, Acero hadfield |
Keyword: | Tribology, Adhesive wear, Manganese austenitic steel, Hadfield steel |
Texto completo: | Texto completo (Ver HTML) Texto completo (Ver PDF) |