Revista: | Computación y sistemas |
Base de datos: | |
Número de sistema: | 000560117 |
ISSN: | 1405-5546 |
Autores: | Carrillo Delgado, C. M1 Filoteo Razo, J. D1 Sierra Hernández, J. M1 Hernández García, J. C1 Jáuregui Vázquez, D1 López Dieguez, Y1 Estudillo Ayala, J. M1 Herrera Piad, L. A1 Rojas Laguna, R1 |
Instituciones: | 1Universidad de Guanajuato, División de Ingenierías, Salamanca, Guanajuato. México |
Año: | 2019 |
Periodo: | Ene-Mar |
Volumen: | 23 |
Número: | 1 |
Paginación: | 63-70 |
País: | México |
Idioma: | Inglés |
Tipo de documento: | Artículo |
Resumen en inglés | In this paper a design of a graphical user interface (GUI), to observe polarization states changes on a standard single-mode optical fiber (SMF-28) that has been twisted, is presented. Here, we modify two different groups of parameters: 1) the input polarization ellipticity injected to an optical fiber; this is, the tilt or the angle of propagation and the intensity on each electric field or the shift phase; the other group is 2) the birefringence fiber values, mainly induced by mechanical efforts, since its fabrication either by pinching, bending or in general by manipulating it; obtaining simulated results that describes the output polarized light at the end of the fiber. The results are depicted on the Poncairé Sphere and Stokes parameters graphics. Moreover, the GUI was developed in Visual Basic, used for the interface windows, and it was connected to Matlab, used like mathematic engine. |
Disciplinas: | Ciencias de la computación |
Palabras clave: | Programación, Programación |
Keyword: | Birefringence, States of polarization, Fiber optics, Simulation |
Texto completo: | Texto completo (Ver HTML) Texto completo (Ver PDF) |