| Revista: | Materials research |
| Base de datos: | PERIÓDICA |
| Número de sistema: | 000312941 |
| ISSN: | 1516-1439 |
| Autores: | Silva, Fernanda Giannotti da1 Liborio, Jefferson Benedicto Libardi |
| Instituciones: | 1Universidade de Sao Paulo, Escola de Engenharia de Sao Carlos, Sao Carlos, Sao Paulo. Brasil |
| Año: | 2006 |
| Periodo: | Abr-Jun |
| Volumen: | 9 |
| Número: | 2 |
| Paginación: | 209-215 |
| País: | Brasil |
| Idioma: | Inglés |
| Tipo de documento: | Nota breve o noticia |
| Enfoque: | Experimental |
| Resumen en inglés | Several electrochemical techniques can be used to monitor corrosion, among them are open circuit potential (OCP) and eletrochemical impedance spectroscopy (EIS). Monitoring OCP is the most typical procedure for routine inspection of reinforced concrete structures and can be easily carried out, however it only gives an approximate idea of the corrosion process. EIS is a more complete technique, which supplies information regarding the mechanism and kinetics of reaction electrochemistries, but only used in the laboratory. Based on these two techniques, this study is related to the steel corrosion in high-performance concrete with silica fume and silica from rice husk. The acceleration of the corrosion was carried out using immersion cycles in a 3.5% NaCl solution. As well as high compressive strength values, the addition of silica fume presented low corrosion risks and high impedance module values and significant increases of the concrete resistivity after 22 months of alternate immersion/drying cycles were obtained |
| Disciplinas: | Ingeniería |
| Palabras clave: | Ingeniería de materiales, Ingeniería mecánica, Ingeniería metalúrgica, Acero, Resistencia a la corrosión, Propiedades electroquímicas, Materiales de construcción |
| Keyword: | Engineering, Materials engineering, Mechanical engineering, Metallurgical engineering, Mechanical properties, Steel, Electrochemical properties, Construction materials |
| Texto completo: | Texto completo (Ver HTML) |
