Influence of Cutting Conditions on Tool Life, Tool Wear and Surface Finish in the Face Milling Process
Título del documento: Influence of Cutting Conditions on Tool Life, Tool Wear and Surface Finish in the Face Milling Process
Revista: Journal of the Brazilian Society of Mechanical Sciences
Base de datos: PERIÓDICA
Número de sistema: 000312104
ISSN: 0100-7386
Autores: 1
2
Instituciones: 1Universidade Federal de Uberlandia, Laboratorio de Ensino e Pesquisa em Usinagem, Uberlandia, Minas Gerais. Brasil
2Universidade Estadual de Campinas, Departamento de Engenharia de Fabricacao, Campinas, Sao Paulo. Brasil
Año:
Periodo: Mar
Volumen: 24
Número: 1
Paginación: 14-14
País: Brasil
Idioma: Inglés
Tipo de documento: Artículo
Enfoque: Experimental
Resumen en inglés The main goal of this work is to study the influence of cutting conditions - cutting speed, feed velocity and feed per tooth - on tool life and surface finish of the workpiece in the face milling of flat surfaces. Aiming to achieve this goal, several milling experiments were carried out with different cutting speeds, feed velocities and feeds per tooth. In the first phase of the experiments, cutting speed was varied without varying feed velocity, which caused a variation in feed per tooth. In the second phase of the experiments, cutting speed and feed velocity were varied in such a way that feed per tooth was kept constant. Tool flank wear and surface roughness of the workpiece were measured as cutting time elapsed. The main conclusions of this work are that a) cutting speed has a strong influence on tool life, regardless of whether feed velocity or feed per tooth varies and b) an increase in surface roughness of the workpiece is not closely related to an increase in wear of the primary cutting edge
Disciplinas: Ingeniería
Palabras clave: Equipo y maquinaria,
Ingeniería industrial,
Ingeniería mecánica,
Molinos,
Cortadoras,
Vida útil,
Desgaste,
Condiciones de trabajo
Keyword: Engineering,
Equipment and machinery,
Industrial engineering,
Mechanical engineering,
Mills,
Cutting machines,
Useful life,
Wear,
Working conditions
Texto completo: Texto completo (Ver HTML)