| Revista: | Journal of applied research and technology |
| Base de datos: | PERIÓDICA |
| Número de sistema: | 000424112 |
| ISSN: | 1665-6423 |
| Autores: | Gebresemati, Mebrahtom1 Gabbiye, Nigus2 Sahu, Omprakash2 |
| Instituciones: | 1Mekelle University, Department of Chemical Engineering, Mekelle. Etiopía 2Bahir Dar University, School of Chemical and Food Technology, Bahir Dar. Etiopía |
| Año: | 2017 |
| Periodo: | Feb |
| Volumen: | 15 |
| Número: | 1 |
| País: | México |
| Idioma: | Inglés |
| Tipo de documento: | Artículo |
| Enfoque: | Aplicado, descriptivo |
| Resumen en inglés | Cyanide is a very toxic compound that is released into the environment through industrial effluents; therefore, it needs to be removed prior to wastewater discharge. Adsorption is one of the most widely used treatment methods for removing contaminants from water and wastewater. In present research work response surface methodology was successfully employed for optimization and analysis of the adsorption process. Batch mode experiments were performed to determine the adsorption equilibrium of cyanide in aqueous solution. At optimum condition initial concentration (10 mg/l), contact time (1 h), adsorbent dose (1 g) and pH (8), 90.6% of cyanide adsorption was obtained. The factorial design and RSM analysis demonstrated that the experimental and the predicted values from the models were in agreement |
| Disciplinas: | Ingeniería |
| Palabras clave: | Ingeniería ambiental, Ingeniería química, Tratamiento de aguas residuales, Cianuro, Adsorción |
| Keyword: | Environmental engineering, Chemical engineering, Waste water treatment, Adsorption, Cyanide |
| Texto completo: | Texto completo (Ver HTML) Texto completo (Ver PDF) |
