| Revista: | Journal of applied research and technology |
| Base de datos: | PERIÓDICA |
| Número de sistema: | 000427940 |
| ISSN: | 1665-6423 |
| Autores: | Oladapo, Bankole I1 Balogun, Vincent A1 Adeoye, Adeyinka O.M1 Olubunmi, Ige E1 Afolabi, Samuel O1 |
| Instituciones: | 1Afe Babalola University, Department of Mechanical and Mechatronics Engineering, Ado-Ekiti, Ekiti. Nigeria |
| Año: | 2017 |
| Periodo: | Ago |
| Volumen: | 15 |
| Número: | 4 |
| País: | México |
| Idioma: | Inglés |
| Tipo de documento: | Artículo |
| Enfoque: | Aplicado, descriptivo |
| Resumen en inglés | The sustainability criterion in the manufacturing industries is imperative, especially in the automobile industries. Currently, efforts are being made by the industries to mitigate CO2 emission by the total vehicle weight optimization, machine utilization and resource efficiency. In lieu of this, it is important to understudy the manufacturing machines adopted in the automobile industries. One of such machine is the hot stamping machine that is used for about 35% of the manufacturing operations within the automobile industries. Therefore, the standardization and optimization of the hot stamping process could reduce the carbon footprint within the automobile industries. This work understudied the on-delay timer functional valve of the hot stamping machine in order to determine various process parameters affecting it. The detailed physical model of the pneumatic and electro-pneumatic cylinder systems for the control is simulated and optimized for both the pneumatic and electro-pneumatic cylinder systems. Experimental and simulation model were established at the FESTO work station and FESTO FluidSIM® 5.1 respectively to evaluate the effective velocity, accelerations, displacement, and flow rate for the pneumatic and electro-pneumatic actuator on both systems. Comparisons were made between pneumatic and electro-pneumatic cylinder systems on their characteristic curve in order to optimize the process variables. The result favours the electro-pneumatic cylinder systems in stability and in designing hot stamping machines. The result obtained could elucidate the understanding of the pressing arm of a hot stamping machine |
| Disciplinas: | Ingeniería |
| Palabras clave: | Ingeniería mecánica, Máquina de estampado en caliente, Sistemas electroneumáticos, Actuador neumático |
| Keyword: | Mechanical engineering, Electropneumatic systems, Pneumatic actuator, Hot stamping machine |
| Texto completo: | Texto completo (Ver HTML) Texto completo (Ver PDF) |
