Modelo de dos zonas para lechos fijos con información asistida por CFD



Título del documento: Modelo de dos zonas para lechos fijos con información asistida por CFD
Revista: Ingeniería mecánica, tecnología y desarrollo
Base de datos: PERIÓDICA
Número de sistema: 000455999
ISSN: 1665-7381
Autores: 1
2
1
Año:
Volumen: 2
Número: 4
Paginación: 120-128
País: México
Idioma: Español
Tipo de documento: Artículo
Enfoque: Prospectivo
Resumen en inglés A Two zone mathematical model fo heat transfer in fixed beds (Two Zones Model) is proposed in this work. According to the model, the bed is divided in two zones: the first region adjacent to the wall- plays an important role in the heat transfer process and the second one -the bulk zone- allows the heat be transported from and to the center of the tube. An appropriate methodology for the estimation of the model parameters, based onthe application of Computational Fluid-Dynamics , is developed here. Specifically the total heat flux in tube wass is calculated with the aim of evaluating the heat transfer coefficient at the wall, Hw, this coefficient would be later correlated with geometrical and operating conditions in the bed. The CFD technique used in this way, replaces well the information based on experimental work, and constitutes a useful tool for obtaining precise information dealing with the bed behavior. In this work, the case of low-conductivity solid particles, wich is strictly the analogous case of mass transfer process, is dealt with operating conditions of steam reforming of natural gas were aopted in calculations. The software used for CFD is Fluent 6.2.1.6 (Computational Fluid-Dynamic Softaware) assisted in the mesh generation by the use of the software Gambit 2-2-3-0
Disciplinas: Ciencias de la computación
Palabras clave: Dinámica computacional de fluídos (CFD),
Lecho fijo,
Modelo de dos zonas,
Modelos matemáticos,
Transferencia de calor
Keyword: Computational fluid dynamics (CFD),
Fixed bed,
Heat transfer,
Mathematical models,
Two-zone model
Solicitud del documento
Nota: El envío del documento tiene costo.









Los documentos originales pueden ser consultados en el Departamento de Información y Servicios Documentales, ubicado en el Anexo de la Dirección General de Bibliotecas (DGB), circuito de la Investigación Científica a un costado del Auditorio Nabor Carrillo, zona de Institutos entre Física y Astronomía. Ciudad Universitaria UNAM. Ver mapa
Mayores informes: Departamento de Información y Servicios Documentales, Tels. (5255) 5622-3960, 5622-3964, e-mail: sinfo@dgb.unam.mx, Horario: Lunes a viernes (8 a 16 hrs.)