Revista: | Dyna (Medellín) |
Base de datos: | PERIÓDICA |
Número de sistema: | 000409434 |
ISSN: | 0012-7353 |
Autores: | Correa Avendaño, Reinaldo1 Sánchez Londoño, Héctor Darío2 García Quintero, Edwin3 |
Instituciones: | 1Universidad de Antioquia, Departamento de Ingeniería Mecánica, Medellín, Antioquia. Colombia 2Universidad de Antioquia, Departamento de Ingeniería de Materiales, Medellín, Antioquia. Colombia 3Universidad de Antioquia, Departamento de Ingeniería Eléctrica, Medellín, Antioquia. Colombia |
Año: | 2014 |
Periodo: | Ago |
Volumen: | 81 |
Número: | 186 |
Paginación: | 159-165 |
País: | Colombia |
Idioma: | Inglés |
Tipo de documento: | Artículo |
Enfoque: | Aplicado, descriptivo |
Resumen en español | En este trabajo se evalúa el efecto del contenido de plata de las aleaciones base Al-Cu en la microestructura, la resistencia a la tracción, la resistencia eléctrica y el incremento de la temperatura con el paso de la corriente eléctrica (efecto Joule). Para tal fin, fueron evaluadas las aleaciones Al-4%Cu-0,5%Mg con contenidos de plata en proporciones del 1,5%, 2,5% y 3,5%. El endurecimiento por precipitación se llevó a cabo mediante tratamientos térmicos de homogenización por solución sólida. El análisis de la microestructura se realizó mediante el microscopio óptico y SEM, además, se realizó análisis de dureza Vickers, ensayos de resistencia a la tracción y pruebas de conductividad eléctrica, las cual se compararon con la aleación A356-T6. Los resultados de esta investigación muestran que el aumento de la plata en la aleación aumenta la resistencia la tracción y disminuye su resistividad. Mediante el análisis del SEM y EDS se observó la fase q (CuAl2), Al6(Cu, Fe) y Al7Cu2Fe |
Resumen en inglés | This study evaluated the effect of the silver content of Al-Cu based alloys on the microstructure, the tensile strength, the electrical resistance and the temperature increase with the passage of electric current (Joule effect). For that purpose, Al-4% Cu-0, 5% Mg alloys were tested with silver content in proportions of 1.5%, 2.5% and 3.5%. Precipitation hardening was carried out by homogenization heat treatment of solid solutions. The microstructure analysis was carried out using optical microscope and SEM, Vickers hardness tests was also performed, tests of tensile strength and electrical conductivity, which were compared with the alloy A356-T6. The results of this research show that the increase of silver in the alloy increased tensile strength and decreases the resistivity. By SEM and EDS analysis of the phase q (CuAl2), Al6 (Cu, Fe) and Al7Cu2Fe was observed |
Disciplinas: | Ingeniería |
Palabras clave: | Ingeniería de materiales, Ingeniería eléctrica, Aleaciones, Duraluminio, Endurecimiento por preciptación, Resistencia eléctrica, Conductividad eléctrica |
Keyword: | Engineering, Electrical engineering, Materials engineering, Alloys, Duralumin, Precipitation hardening, Electrical resistivity, Electrical conductivity |
Texto completo: | Texto completo (Ver HTML) |