Revista: | Visión electrónica |
Base de datos: | PERIÓDICA |
Número de sistema: | 000461466 |
ISSN: | 1909-9746 |
Autores: | Rodríguez, Alma G1 Vidal P., Luis R2 Diaz M., Juan Manuel2 González Pinzón, César Leonardo2 |
Instituciones: | 1Instituto Tecnológico y de Estudios Superiores de Monterrey, Monterrey, Nuevo León. México 2Universidad Autónoma de Ciudad Juárez, Ciudad Juárez, Chihuahua. Mexico |
Año: | 2014 |
Periodo: | Ene-Jun |
Volumen: | 8 |
Número: | 1 |
Paginación: | 143-153 |
País: | Colombia |
Idioma: | Inglés |
Tipo de documento: | Artículo |
Enfoque: | Prospectivo |
Resumen en inglés | This paper discusses the development process involved in making a user interface translate G-Code (ISO6983) using Microsoft Visual Basic 2010 together with communication protocol OPC. This interface was developed in three modules, the first one verifies syntax and lexicon, the second is a command converter for a Programmable Logic Controller Allen Bradley L63 using a SERCOS interface card and servo drive ULTRA 3000, and the last one executes motion control instructions. The interface is used for a profile milling process, on an XY plane and using G00, G01, G02 and G03 codes generated in a Fanuc postprocessor 3XMILL. The interface shows errors detected in the verification module according to the parameters established and identifies the corresponding line; it also monitors the XY position in real time, The interface allows line-by-line execution or auto-matic mode. The interface does not require information for cutting speed, tool advance speed, and spindle speed or tool compensation from the NC program. The interface was also developed using incremental and reuse oriented methodologies |
Disciplinas: | Ciencias de la computación |
Palabras clave: | Controlador lógico programable, Detección de errores, Interfaces de usuarios |
Keyword: | Error detection, Programmable logic controller, User interfaces |
Texto completo: | https://revistas.udistrital.edu.co/index.php/visele/article/view/7888/9599 |