Influencia de algunos parámetros en el alabeo de la madera aserrada de Pinus caribaea Morelet, var. Caribaea



Título del documento: Influencia de algunos parámetros en el alabeo de la madera aserrada de Pinus caribaea Morelet, var. Caribaea
Revista: Revista cubana de ciencias forestales
Base de datos: PERIÓDICA
Número de sistema: 000429432
ISSN: 2310-3469
Autors: 1
1
2
Institucions: 1Universidad de Pinar del Río, Pinar del Río. Cuba
2Universidad Católica del Norte, Antofagasta. Chile
Any:
Període: Ene-Abr
Volum: 7
Número: 1
Paginació: 17-27
País: Cuba
Idioma: Español
Tipo de documento: Artículo
Enfoque: Descriptivo, aplicado
Resumen en español El trabajo que se presenta tiene como objetivo describir la influencia de la inclinación de la fibra y el ancho de los anillos de crecimiento en las deformaciones (alabeo) en la dirección radial de la madera aserrada (postsecado) de Pinus caribaea Morelet, var. Caribaea. Se tomaron 100 piezas aserradas de tres posiciones en la troza, a diferentes distancias de la médula en la dirección radial, codificadas como A (12 cm), B (24 cm) y C (36 cm). Para medir el ancho de los anillos de crecimiento se utilizó un pie de rey, tomándose una posición referencial en la dirección horizontal. Se hicieron mediciones de la inclinación de la fibra, haciendo uso de una pieza puntiaguda y una cinta métrica y se determinó la longitud de los lados: cateto opuesto e hipotenusa del triángulo formado y aplicando la expresión se determinó el ángulo objeto de estudio. Como resultado se obtuvo que la inclinación de la fibra, el ancho de los anillos de crecimiento y alabeo disminuyen hacia la corteza. El coeficiente de correlación entre alabeo e inclinación de la fibra es de 0,372 y entre alabeo y ancho de los anillos es de r = 0,859
Resumen en inglés The aim of this paper is to describe the influence of the fibre inclination and the width of the growth rings on the deformations (warping), in the radial direction of the sawn wood (post drying) of Pinus caribaea Morelet, var. caribaea. One hundred sawn wood pieces were taken from three positions in the log, at different distances from the pith in the radial direction, coded as A (12 cm), B (24 cm) and C (36 cm). To measure the width of the growing rings, a callipers was used, taking a referential position in the horizontal direction. The inclination of the fibre was measured using a pointed piece and a tape measure and the length of the sides was determined: the opposite cathetus and the hypotenuse of the triangle formed and applying the expression the studied angle was determined. As a result, it was obtained that the inclination of the fibre, the width of the growth rings and warping decrease towards the bark. The correlation coefficient between warping and fibre inclination is 0.372 and between warping and ring width is r = 0.859
Disciplines Agrociencias
Paraules clau: Silvicultura,
Pinus caribaea,
Alabeos,
Anillos de crecimiento,
Madera aserrada,
Fibras
Keyword: Silviculture,
Pinus caribaea,
Warping,
Growth rings,
Sawn wood,
Fibres
Text complet: Texto completo (Ver HTML)