Oligobetapinene as barrier improver to CO2 of HDPE in thin films of binary blends



Título del documento: Oligobetapinene as barrier improver to CO2 of HDPE in thin films of binary blends
Revista: Polimeros (Sao Carlos)
Base de datos: PERIÓDICA
Número de sistema: 000314146
ISSN: 1678-5169
Autors: 1

2
Institucions: 1Universidade Federal do Rio de Janeiro, Instituto de Macromoleculas Professora Eloisa Mano, Rio de Janeiro. Brasil
2Universidade Federal do Rio de Janeiro, Rio de Janeiro. Brasil
Any:
Volum: 14
Número: 4
Paginació: 261-264
País: Brasil
Idioma: Inglés
Tipo de documento: Artículo
Enfoque: Experimental, aplicado
Resumen en inglés Quenched thin films (about 100 microns thick) of high-density polyethylene (HDPE) / oligobetapinene (OBP) blends were prepared by melt mixing with the amount of OBP varying from 0 to 40%. The results of CO2 permeation, thermal behavior and morphology are reported. From -130 to -100 °C we observed two peaks in DSC measurements, the lower one being ascribed to g-transition of HDPE. The upper one attributed to Tg which was shift at high contents of OBP. The OPB molecules also displayed another transition at higher temperatures. The normalized degree of crystallinity of HDPE remained constant while the overall crystallinity of the blends was reduced in all blends. We have hypothesized that three distinct phases coexist, viz. a HDPE-amorphous phase with some amount of OBP molecules, OBP-amorphous phase with polyolefin and HDPE-crystalline phases. The permeation test revealed a decrease in permeability to CO2 independent of the amount of OBP in the blends. The reduction of gas permeation could be explained mainly by the rigidity of the OBP rich phase that has counterbalanced the decrease of overall crystallinity of the film blends
Disciplines Química
Paraules clau: Química de polímeros,
Polietileno de alta densidad,
Oligobetapinene,
Mezcla de polímeros,
Permeabilidad,
Propiedades térmicas
Keyword: Chemistry,
Polymer chemistry,
High density polyethylene,
Oligobetapinene,
Permeability,
Thermal properties,
Polymers blend
Text complet: Texto completo (Ver HTML)