| Revista: | Latin American applied research |
| Base de datos: | PERIÓDICA |
| Número de sistema: | 000332257 |
| ISSN: | 0327-0793 |
| Autores: | Hintermeyer, B.H1 Lacour, N.A1 Pérez Padilla, A2 Tavani, E.L1 |
| Instituciones: | 1Comisión de Investigaciones Científicas de la Provincia de Buenos Aires, Centro de Tecnología de Recursos Minerales y Cerámica, Buenos Aires. Argentina 2Universidad Nacional de San Luis, Facultad de Química, Bioquímica y Farmacia, San Luis. Argentina |
| Año: | 2008 |
| Periodo: | Ene |
| Volumen: | 58 |
| Número: | 1 |
| Paginación: | 63-71 |
| País: | Argentina |
| Idioma: | Inglés |
| Tipo de documento: | Artículo |
| Enfoque: | Experimental, aplicado |
| Resumen en inglés | The separation of the chromium(III) dissolved in a tanning wastewater was studied by means of precipitation with calcium carbonate, reverse osmosis with polyamide membrane and adsorption on activated carbon. All tests were carried out at laboratory scale with a wastewater obtained from a unique typical tannage process. In a first stage, the original effluent was treated by sieving and ultrafiltration to perform a partial removal of fats and denaturalized proteins. The separation of chromium( III) by precipitation, reverse osmosis and adsorption was performed with the tanning wastewater so treated. The precipitation efficiency was determined by taking into account the chromium(III) content of the supernatant with the reaction time and with the alkali amount added. The polyamide membrane behavior used was established by the permeate flux and by the rejection of each species. The adsorption valuation involved the determination of the adsorbed amounts of chromium(III), sodium, chloride and sulfate. Under optimum conditions established for each process, the following results were obtained: a supernatant with less than 3.0 mg L-1 of chromium(III) by precipitation, a permeate with less than 2.0 mg L-1 of chromium(III) by reverse osmosis and an equilibrium solution with less than 6.0 mg L-1 of chromium(III) by adsorption. To conclude, the main physicochemical characteristics of the three processes used to remove chromium(III) dissolved in the industrial effluent were analyzed |
| Disciplinas: | Ingeniería |
| Palabras clave: | Ingeniería ambiental, Curtiduria, Aguas residuales, Tratamiento de aguas, Cromo, Osmosis inversa, Adsorción |
| Keyword: | Engineering, Environmental engineering, Tanning, Waste water, Water treatment, Chromium, Reverse osmosis, Adsorption |
| Texto completo: | Texto completo (Ver PDF) |
