The negative-difference effect during the localized corrosion of magnesium and of the AZ91HP alloy



Título del documento: The negative-difference effect during the localized corrosion of magnesium and of the AZ91HP alloy
Revista: Journal of the Brazilian Chemical Society
Base de datos: PERIÓDICA
Número de sistema: 000311312
ISSN: 0103-5053
Autors: 1

Institucions: 1Universidade Federal do Rio Grande do Sul, Departamento de Metalurgia, Porto Alegre, Rio Grande do Sul. Brasil
Any:
Període: Ago
Volum: 14
Número: 4
Paginació: 584-593
País: Brasil
Idioma: Inglés
Tipo de documento: Artículo
Enfoque: Experimental, aplicado
Resumen en inglés Galvanostatic tests with pure magnesium and with the AZ91HP alloy were performed in NaCl solutions, and the volume of hydrogen evolved during the tests was measured. In order to examine the negative-difference effect, a concept was developed to separate the hydrogen evolution (H.E.) on the passive surface and the H.E. inside the pits. An analysis of the volumetric data showed that the current density of H.E. inside the pits is much higher for Mg than for the AZ91HP alloy. With the assumption, that the ratio between the hydrogen reduction rate and the rate of the anodic metal dissolution, expressed by the factor k, does not change with the polarization, a k value of ca. 0.5 for pure Mg was found, while for the AZ91HP alloy this value was only ca. 0.3
Resumen en portugués Foram realizados testes galvanostáticos em soluções de NaCl com magnésio puro e com a liga AZ91HP, tendo sido medido o volume de hidrogênio desprendido durante os testes. A fim de estudar o efeito da diferença negativa (NDE), uma idéia foi desenvolvida para separar o desprendimento de hidrogênio (H.E) na superfície passiva do desprendimento dentro dos pites. A análise dos dados volumétricos mostrou que a corrente de redução de hidrogênio dentro dos pites, sobre o Mg, é muito mais alta do que nos pites sobre a liga AZ91HP. Supondo que a razão entre a taxa de redução de hidrogênio e a taxa de dissolução de magnésio, expressa pelo fator k, não muda com a polarização, foi encontrado um valor de aproximadamente 0,5 para o Mg puro. Para a liga AZ91HP foi alcançado somente um valor em torno de 0,3
Disciplines Ingeniería,
Química
Paraules clau: Ingeniería de materiales,
Química metalúrgica,
Magnesio,
Corrosión,
Aleaciones,
Efecto de diferencia negativa
Keyword: Engineering,
Chemistry,
Materials engineering,
Metallurgical chemistry,
Magnesium,
Corrosion,
Alloys,
Negative-difference effect
Text complet: Texto completo (Ver HTML)