A novel Ho(III) sensor based on N,N'-bis(2- pyridinecarboxamide)-1,2-benzene as a neutral ion carrier



Título del documento: A novel Ho(III) sensor based on N,N'-bis(2- pyridinecarboxamide)-1,2-benzene as a neutral ion carrier
Revista: Journal of the Brazilian Chemical Society
Base de datos: PERIÓDICA
Número de sistema: 000311936
ISSN: 0103-5053
Autors: 1



2
Institucions: 1Tehran University, Center of Excellence in Electrochemistry, Teherán. Irán
2Isfahan University of Technology, Department of Chemistry, Isfahán. Irán
Any:
Període: Dic
Volum: 17
Número: 7
Paginació: 1211-1216
País: Brasil
Idioma: Inglés
Tipo de documento: Artículo
Enfoque: Experimental, aplicado
Resumen en inglés N,N'-bis(2- pyridinecarboxamide)-1,2-benzene (H2BPB) was found to have a selective and sensitive behavior towards Ho(III) ion, in comparison to a large number of lanthanide, inner transition and representative metal ions and was hence applied as a neutral ionophore, for preparing an Ho(III) membrane sensor, with high selectivity and sensitivity. The membranes, also contain potassium tetrakis(p-chlorophenyl) borate as an anionic additives, and were tested by using different plasticizing solvent mediators such as benzyl acetate (BA), nitrobenzene (NB), and o-nitrophenyloctyl ether (NPOE). The optimum composition was found to be H2BPB-PVC- KTpClPB-BA with the ratios of 6.0: 30.0: 4.0: 60.0, respectively. Having a Nernstian response of 19.6 ± 0.2 mV per decade of Ho(III) activity, the linear range of the sensor was found to be relatively wide (from 1.0×10-5 to 1.0 ×10-2 mol L-1). It can work well in the pH range of 3.0-11.5. The lower detection limit (LDL) of the sensor was calculated to be 8.0 ×10-6 mol L-1. The excellent Ho(III)-selectivity of the proposed sensor with regard to most common metal ions, and especially, all lanthanide ions, is another advantage that can be mentioned about this sensor. The sensor was successfully used as an indicator electrode for titration of 25 mL of a 1.0 × 10-4 mol L-1 Ho(III) ions with a 1.0 × 10-2 mol L-1 EDTA, and vise versa. To the best of our knowledge this is the first Ho(III)-selective sensor
Resumen en portugués N,N'-bis(2- piridinacarboxamida)-1,2-benzeno (H2BPB) apresentou um comportamento seletivo e sensível, frente ao íon Ho(III), em comparação a um grande número de íons de metais de transição interna, representativos e de lantanídeos, tendo sido portanto, aplicado como um ionóforo neutro para preparação de uma membrana sensora Ho(III), com alta seletividade e sensitividade. As membranas também contêm tetraquis(p-clorofenil) borato de potássio (KTpClPB) como um aditivo aniônico, e foram testadas pelo uso de diferentes solventes mediadores plastificantes, tais como benzil acetato (BA), nitrobenzeno (NB), e éter o-nitrofeniloctil (NPOE). A composição ótima encontrada foi H2BPB-PVC- KTpClPB-BA, com razão de 6,0: 30,0: 4,0: 60,0, respectivamente. Com uma resposta Nernstiniana de 19,6 ± 0,2 mV per década de atividade de Ho(III), o intervalo linear encontrado para o sensor foi relativamente grande (de 1,0×10-5 a 1,0 ×10-2 mol L-1), podendo trabalhar bem no intervalo de pH de 3,0 a 11,5. O limite de detecção mais baixo (LDL) calculado para o sensor foi de 8,0 ×10-6 mol L-1. A excelente seletividade do sensor proposto para Ho(III), considerando os íons metálicos mais comuns e, especialmente todos os íons lantanídeos, é uma outra vantagem deste sensor. O sensor foi usado com sucesso como eletrodo indicador na titulação de 25 mL de solução de íons Ho(III) a 1,0 × 10-4 mol L-1, com EDTA a 1,0 × 10-2 mol L-1, e vice-versa. Este é o primeiro sensor seletivo para Ho(III)
Disciplines Química
Paraules clau: Química analítica,
Holmio,
Sensores de membrana,
N,N'-bis(2-piridincarboxamida)-1,2-benceno,
Electrodos selectivos de iones
Keyword: Chemistry,
Analytical chemistry,
Holmium,
Membrane sensors,
N,N'-bis(2-pyridinecarboxamide)-1,2- benzene,
Ion-selective electrodes
Text complet: Texto completo (Ver HTML)