Revista: | Boletín de geología - Universidad Industrial de Santander |
Base de datos: | PERIÓDICA |
Número de sistema: | 000456770 |
ISSN: | 0120-0283 |
Autors: | Moreno Enriquez, Angee1 Vargas Silva, Diego1 Gambús Ordaz, Maika1 Calderón Carrillo, Zuly1 Robles Albarracín, Emmanuel1 |
Institucions: | 1Universidad Industrial de Santander, Escuela de Ingeniería de Petróleos, Bucaramanga, Santander. Colombia |
Any: | 2022 |
Període: | May-Ago |
Volum: | 44 |
Número: | 2 |
Paginació: | 109-123 |
País: | Colombia |
Idioma: | Español |
Tipo de documento: | Artículo |
Enfoque: | Analítico, descriptivo |
Resumen en español | El gas puede estar presente en la roca generadora, ya sea como gas libre en el medio poroso, gas libre en las fracturas naturales o gas que se encuentra adsorbido, el cual puede llegar a representar hasta el 85% del volumen total presente en el yacimiento. Diferentes cuestionamientos han sido generados por los profesionales de la industria de los hidrocarburos acerca de si todos los parámetros necesarios son considerados en la cuantificación del volumen de gas original in situ, con el fin de mitigar la incertidumbre en su estimación. El objetivo de esta investigación es estudiar los principales métodos y correlaciones empleados para cuantificar el gas adsorbido por la roca, para finalmente estimar el gas total. Para lo anterior, se estudiaron múltiples modelos de adsorción con información de la literatura, con el fin de determinar cuáles modelos presentaban menor desviación, con respecto a los datos de laboratorio. Así mismo, usando las características de la Formación La Luna en Colombia, se propone una analogía con el fin de estimar las posibles reservas de esta formación. Los resultados demostraron que los modelos con mayor número de parámetros involucrados presentan mejor ajuste con los datos de laboratorio, sin embargo, modelos como el de Langmuir de tres parámetros o el de Jovanovic se acercaron en gran medida a los valores reales. Lo anterior garantiza un menor error en el cálculo del gas total |
Resumen en inglés | The gas can be present in the source rock, either as free gas in the porous medium, free gas in natural fractures or as gas adsorbed, which can represent up to 85% of the total volume present in the reservoir. Different inquiries have been pointed by professionals in the oil and gas industry about whether all the necessary parameters are considered in the quantification of the original gas in place volume, in order to mitigate the uncertainty in its estimation. The objective of this research is to study the main methods and correlations used to quantify the gas that is adsorbed by the rock, to finally estimate the total gas. With that said, multiple adsorption models were studied with information from the literature, in order to determine which models had the least deviation, comparing to the laboratory data. Likewise, using the characteristics of the La Luna Formation in Colombia, an analogy is proposed to estimate the possible reserves of this formation. The results showed that the models with a greater number of parameters involved presented a better fit with the laboratory data, however, models such as the three-parameter Langmuir model or the Jovanovic model were very close to the real values. This guarantees a smaller error in the calculation of the total gas |
Disciplines | Geociencias |
Paraules clau: | Geología, Gas, Geoquímica, Isotermas, Yacimientos de roca generadora, Colombia |
Keyword: | Geology, Gas, Geochemistry, Isotherms, Source rock reservoirs, Colombia |
Text complet: | Texto completo (Ver HTML) Texto completo (Ver PDF) |