Isomerización de m-xileno sobre MCM-48 impregnada con ácido tungstenofosfórico



Título del documento: Isomerización de m-xileno sobre MCM-48 impregnada con ácido tungstenofosfórico
Revista: Avances en química
Base de datos: PERIÓDICA
Número de sistema: 000354622
ISSN: 1856-5301
Autors: 1
1
1
1
1
1
1
1
1
Institucions: 1Universidad de Los Andes, Facultad de Ciencias, Mérida. Venezuela
Any:
Volum: 5
Número: 2
Paginació: 99-105
País: Venezuela
Idioma: Español
Tipo de documento: Artículo
Enfoque: Experimental, analítico
Resumen en español La isomerización de m-xileno fue estudiada sobre catalizadores mesoporosos del tipo MCM-48 impregnados con ácido tungstenofosfórico. El material mesoporoso fue sintetizado hidrotérmicamente a 423 K utilizando bromuro de cetil-trimetil-amonio (CTMABr) como agente estructural. Los catalizadores fueron preparados con diferentes porcentajes de ácido tungstenofosfórico (15, 20, 25, 30 y 40% p/p) en metanol bajo agitación. Los sólidos fueron caracterizados mediante DRX, Adsorción de Nitrógeno, TPD-NH3, SEM y FTIR. Se encontró que el heteropoliácido se encuentra altamente disperso en el interior de los poros del material mesoporoso; sin embargo, la presencia del heteropoliácido en el interior de los poros reduce de manera significativa el área superficial, el volumen de poro y en menor grado el diámetro de poro. Todos los catalizadores fueron activos en la transformación de m-xileno a p-, o-xileno y trimetilbencenos. El catalizador preparado con 30% de ácido tungstenofosfórico fue el más activo, debido al elevado número de sitios activos accesibles al sustrato y una mayor actividad por sitio. Los catalizadores fueron selectivos a isomerización y a p-xileno
Resumen en inglés The m-xylene isomerization was studied on mesoporous catalyst type MCM-48, which was impregnated with tungstophosphoric acid. The synthesis was carried out hydrothermally at 423 K, using cetyl trimethyl ammonium bromide (CTMABr) as the structural directing agent. The catalysts were prepared with different percentage of tungstophosphoric acid (15, 20, 25, 30 y 40 wt. %) in methanol under stirring. The solids were characterized by XRD, nitrogen adsorcion, TPD-NH3, SEM and FTIR. The tungstophosphoric acid was found highly dispersed inside the pores of the mesoporous material; however, the acid presence inside the pores reduced markedly the surface area, pore volume and to a less extent the diameter. The catalysts were active in the m-xylene trans-formation to p- and o-xylene and trimethylbencenes. The catalyst prepared with 30 wt. % of tungsto-phosphoric acid resulted the most active, due to its higher number of active acid sites accessibles to the reacting molecules and to their higher activity per site. The catalysts were selective to isomerization reaction and to p-xylene
Disciplines Química
Paraules clau: Química orgánica,
Isomerización,
M-xileno,
MCM-48,
Acido tungstenofosfórico
Keyword: Chemistry,
Organic chemistry,
Isomerization,
M-xylene,
MCM-48,
Tungstophosphoric acid
Text complet: Texto completo (Ver PDF)