Revista: | Revista Facultad de Ingeniería. Universidad de Antioquia |
Base de datos: | |
Número de sistema: | 000563374 |
ISSN: | 0120-6230 |
Autores: | Uribe Grajales, Lina Maria1 Vásquez Arroyave, Ferley Alejandro1 Thomas, Jorge Enrique2 Calderón Gutiérrez, Jorge Andrés1 |
Instituciones: | 1Universidad de Antioquia, Facultad de Ingeniería, Medellín, Antioquía. Colombia 2Universidad Nacional de La Plata, Facultad de Ciencias Exactas, La Plata, Buenos Aires. Argentina |
Año: | 2018 |
Periodo: | Abr-Jun |
Número: | 87 |
Paginación: | 41-49 |
País: | Colombia |
Idioma: | Inglés |
Tipo de documento: | Artículo |
Resumen en español | Los óxidos de manganeso con estructura tipo espinela (LiMn 2 O 4) han sido utilizados con éxito como materiales de cátodo para las baterías de ion-litio. Para mejorar la capacidad e incrementar el potencial de descarga de la batería, comúnmente se han adicionado metales de transición a la espinela, como dopantes o sustituyentes del manganeso. Esto puede conferirle también estabilidad a la estructura del material de cátodo. En este trabajo se evaluó la obtención y el desempeño de las espinelas de LiMn 2 O 4 (LMO) y LiNi 0.5 Mn 1.5 O 4 (LNMO) obtenidas por procesos de síntesis en estado sólido y sol-gel se estudiaron. Los materiales sinterizados de (LMO) y (LMNO) se caracterizaron por espectroscopia Raman y difracción de rayos X (DRX) para evidenciar la formación de la estructura tipo espinela. Fue corroborado que mediante ambos métodos de síntesis se puede producir una estructura de espinela adecuada. El análisis SEM mostró en general que la espinela adquiere una forma octahedral. El tamaño de partícula cambia de acuerdo al método de síntesis empleado, obteniendo un menor tamaño de partícula en la síntesis por sol-gel. La caracterización electroquímica demuestra que la síntesis por estado sólido genera componentes con mayor pureza y cristalinidad, los cuales generan una mayor capacidad de intercalación de iones litio. La adición de níquel a la espinela incrementa el potencial de descarga del cátodo en 0.5V. |
Resumen en inglés | Spinel-structured lithium manganese oxide (LiMn 2 O 4) has been successfully used as a cathode material for various lithium batteries. To improve the capacity and increase the discharge potential of the battery, transition metals are commonly added to the spinel as dopants or as a substitute for manganese. This can also confer stability on the structure of the cathode material. In this work, the production and performance of spinel LiMn 2 O 4 (LMO) and LiNi 0.5 Mn 1.5 O 4 (LNMO) by solid-state and sol-gel synthesis methods were studied. Synthetized (LMO) and (LNMO) materials were characterized by Raman spectroscopy and X-ray diffraction (XRD) to verify the formation of a spinel-like structure. It was corroborated that both synthesis methods can produce an adequate spinel structure. SEM analyses showed that in general, spinel take an octahedral form. The particle size changes according to the synthesis method used. Lower particle sizes were obtained by sol-gel. The electrochemical characterization demonstrates that solid-state synthesis generates compounds with greater purity and crystallinity, which induces a greater capacity of lithium ion intercalation. The addition of nickel to the spinel increases the discharge potential of the cathode by 0.5V. |
Disciplinas: | Ingeniería, Ingeniería |
Palabras clave: | Batería ion-litio, Espinela de manganeso, Síntesis en estado sólido, Sol-gel, Sustitución elemental, Ingeniería electrónica, Ingeniería de materiales |
Keyword: | Lithium-ion battery, Manganese spinel, Solid-state synthesis, Sol-gel, Elemental substitution, Electronic engineering, Materials engineering |
Texto completo: | Texto completo (Ver HTML) Texto completo (Ver PDF) |