Hydrodeoxygenation of furfuryl alcohol over Cu/MgAl and Cu/ZnAl catalysts derived from hydrotalcite-like precursors



Document title: Hydrodeoxygenation of furfuryl alcohol over Cu/MgAl and Cu/ZnAl catalysts derived from hydrotalcite-like precursors
Journal: Ingeniería e investigación
Database: PERIÓDICA
System number: 000408081
ISSN: 0120-5609
Authors:
1
2
Institutions: 1Politécnico Colombiano "Jaime Isaza Cadavid", Medellín, Antioquia. Colombia
2Universidad de Antioquia, Medellín, Antioquia. Colombia
Year:
Season: Abr
Volumen: 37
Number: 1
Pages: 34-42
Country: Colombia
Language: Inglés
Document type: Artículo
Approach: Aplicado, descriptivo
Spanish abstract Se investigó la hidrodesoxigenación(HDO) del furfuril alcohol sobre catalizadores de Cu/MgAl y Cu/ZnAl con diferentes relaciones molares Mg/Al y Zn/Al. Óxidos mixtos de Mg-Al y Zn-Al derivados de precursores tipo hidrotalcitas se usaron como soporte, los cuales fueron impregnados con una solución acuosa de nitrato de cobre, mediante el método de impregnación húmeda. La reacción de hidrodesoxigenación (HDO) se realizó en un reactor tipo batch a 5 MPa de H2 y 200 °C por 4 h. Entre los catalizadores estudiados, el catalizador de Cu/MgAl-0.5 exhibió la más alta conversión del furfuril alcohol (86 %) y rendimiento hacia ciclopentanol (35 %), el cual es el producto de reacción con mayor relación hidrógeno-carbono (H/C). Con el catalizador de Cu/MgAl-3 se logró un alto rendimiento hacia ciclopentanona (67 %). Los resultados obtenidos, mostraron que los catalizadores de óxidos mixtos derivados de precursores tipo hidrotalcitas son una alternativa prometedora para mejorar las características del bio-oil
English abstract The aqueous phase hydrodeoxygenation (HDO) of furfuryl alcohol over Cu/MgAl and Cu/ZnAl catalysts with different Mg/Al and Zn/ Al molar ratios, were investigated. Mg-Al and Zn-Al mixed oxides derived from hydrotalcites precursors were used as supports, which were impregnated with an aqueous solution of copper nitrate by incipient wetness impregnation. The HDO reaction was carried out in a typical batch reactor at 5 MPa of H2 and 200 °C for 4 h. Among the catalysts studied, the Cu/MgAl-0.5 catalyst exhibited the higher furfuryl alcohol conversion (86 %) and yield of cyclopentanol (35 %), which is the reaction product with the highest hydrogen-carbon (H/C) ratio. With the Cu/MgAl-3 catalyst a high cyclopentanone yield (67 %) was achieved. The results obtained, showed that copper supported on mixed oxides catalysts derived from hydrotalcite precursors are a promising alternative to improve the bio-oil quality
Disciplines: Ingeniería,
Química
Keyword: Ingeniería química,
Química orgánica,
Hidrotalcitas,
Ciclopentanol,
Alcohol furfurílico,
Hidrodesoxigenación,
Catalizadores,
Bio aceite
Keyword: Engineering,
Chemistry,
Chemical engineering,
Organic chemistry,
Hydrotalcites,
Cyclopentanol,
Furfuryl alcohol,
Hydrodeoxygenation,
Catalysts,
Bio oil
Full text: Texto completo (Ver HTML)